User manual EPSON WORKFORCE WF-2510WF

[. . . ] Epson is not responsible for any use of this information as applied to other products. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions. Seiko Epson Corporation and its affiliates shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as Epson Approved Products by Seiko Epson Corporation. [. . . ] ❏ Double-click the product shortcut icon on your Windows taskbar. To add a shortcut icon to the taskbar, see the following section: & “From the shortcut icon on the taskbar” on page 19 ❏ Open the printer driver, click the Maintenance tab, then click the EPSON Status Monitor 3 button. A graphic displays the ink cartridge status. Note: ❏ If EPSON Status Monitor 3 does not appear, access the printer driver and click the Maintenance tab and then the Extended Settings button. In the Extended Settings window, check the Enable EPSON Status Monitor 3 check box. ❏ ❏ Depending on current settings, the simplified status monitor may be displayed. Click the Details button to display the window above. The ink levels displayed are an approximate indication. For Mac OS X You can check the ink cartridge status using EPSON Status Monitor. Follow the steps below. A Access the Epson Printer Utility 4. & “Accessing the printer driver for Mac OS X” on page 19 35 User’s Guide Replacing Ink Cartridges B Click the EPSON Status Monitor icon. The EPSON Status Monitor appears. Note: ❏ The graphic displays the ink cartridge status when EPSON Status Monitor was first opened. To update the ink cartridge status, click Update. The ink cartridge holder moves to the ink cartridge check position. The cartridge indicated by the expended or low. icon is 40 User’s Guide Replacing Ink Cartridges Important: c Do not move the ink cartridge holder by hand; otherwise, you may damage the product. Always press the + button to move it. C Press the + button again. If more than one ink cartridge is expended, the ink cartridge holder moves to the you press the + button until all expended ink cartridges have been indicated. mark. This occurs each time Once all of the expended ink cartridges have been indicated, the ink cartridge holder moves to the ink cartridge replacement position when you press the + button. D Pinch and remove the ink cartridge. Note: Removed ink cartridges may have ink around the ink supply port, so be careful not to get any ink on the surrounding area when removing the cartridges. E Gently shake new replacement cartridges four or five times and then unpack. 41 User’s Guide Replacing Ink Cartridges Important: c ❏ Be careful not to break the hooks on the side of the ink cartridge when you remove it from the package. ❏ Do not touch the green IC chip or the small window on the side of the cartridge. Doing so may prevent normal operation and printing. F Remove only the yellow tape. Important: c ❏ You must remove the yellow tape from the cartridge before installing it; otherwise, print quality may decline or you may not be able to print. ❏ ❏ ❏ If you have installed an ink cartridge without removing the yellow tape, take the cartridge out of the product, remove the yellow tape, and then reinstall it. Do not remove the transparent seal from the bottom of the cartridge; otherwise, the cartridge may become unusable. Do not remove or tear the label on the cartridge; otherwise, ink will leak. 42 User’s Guide Replacing Ink Cartridges G Insert the cartridge and press it until it clicks. [. . . ] Make sure the top surface of the ink cartridges align. D Close the printer cover, and press the + button in the control panel. 71 User’s Guide Troubleshooting for Printing Increasing the Print Speed (For Windows Only) Print speed may be increased by selecting certain settings in the Extended Settings window when the printing speed is slow. Click the Extended Settings button on your printer driver’s Maintenance window. The following dialog box appears. Select the following check boxes and print speed may be increased. ❏ High Speed Copies 72 User’s Guide Troubleshooting for Printing ❏ Always spool RAW datatype ❏ Page Rendering Mode ❏ Print as Bitmap For more details on each item, see the online help. Other Problem Printing plain papers quietly When plain paper is selected for the paper type and Standard (Windows) or Normal (Mac OS X) is selected as for quality in the printer driver, the product prints at high speed. Try choosing Quiet Mode for quieter operation which will reduce the print speed. [. . . ]