User manual ERICSSON ERIFOX III-D

[. . . ] Rev C PF9303-17 Erifox III-D PBX Ericsson Businessphone 6/III-D User Manual Relevant directives: 73/23/EEC Low voltage directive 89/336/EEC EMC directive Erifox PBXs are developed and manufactured in Norway. READ THIS FIRST. INSTALLATION MANUAL/ USER MANUAL Rev C For telephone exchange 3/8 version Erifox III-D (Ericsson BusinessPhone 6 version). READ THIS FIRST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1. 1 Features and user possibilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 A 2 Installation. [. . . ] If you suspect that your extension has been diverted by accident, or by someone else, please dial the service code above. Warning! User Manual for Erifox III-D 13. 01. 04 Rev B Page 16 B 6 OPERATOR FUNCTIONS. B 5. 15 Reset. These temporary functions B 5. 13 and B 5. 14. can be cancelled from the programming station. The values you have programmed are then reinstalled. 22, and dial: *# B 5. 16 Stop alarm If the alarm feature is used, and the alarm has been activated, it is stopped using the following procedure: Lift the hand-set of any extension number, and dial: ## B 6 OPERATOR FUNCTIONS. The PABX can be running in three different modes: NORMAL mode, NIGHT mode, and OPERATOR mode. The receiving of incoming external calls are different for the three modes. The OPERATOR station (console) is extension no. Normal mode: -All incoming calls will ring at the pre-determined telephones which are programmed with the ringing signal. -Transferred calls will be reverted after 45 sec. -External "call waiting" signal to all busy extensions, except faxline. Night mode: -All incoming calls will ring at the pre-determined telephones which are programmed with the night mode ringing signal. Special programming is required for night mode service. Operator mode: -All incoming calls will be signalled on no. -Call waiting signal only when transferring a call from the operator. -Transferred calls will be reverted to the operator after 40 sec. -External call pick-up by dialling 0 cannot be performed by other than no. Operator mode can be selected by programming from the programming station no. Dial: * 9 0 Dial: * 9 1 Dial: * 9 2 -You hear the internal dial-tone. Operator mode. C 7 CHOICE OF FUNCTIONS. User Manual for Erifox III-D 13. 01. 04 Rev B Page 17 C 7 CHOICE OF FUNCTIONS. Default programming. At delivery, the extension functions are: -Normal mode, all extensions ring when external calls arrive. -You have access to external lines from any extension. -No restrictions for the outgoing calls. All programming is executed from extension no. 22! By using the number and symbol keys on telephone set no. [. . . ] Dial the extension number you want to call: Group call (all call). Dial 41 for calls to line 1, Dial 42 for calls to line 2, Dial 43 for calls to line 3. Outgoing calls using the internal memory. (a a = memory location number from 22 to 69) Example: Dial number stored in memory location 45: Dial: * 45. 22 - 29. Answering calls. [. . . ]