User manual ERICSSON GA628

[. . . ] Mobile Phone for the GSM Network Ericsson GA628 User's Manual EN The symbol on our products signifies that they have been certified according to the EMC directive 89/336/EEC, the Telecommunications directive 91/263/EEC, and the Low Voltage directive 73/23/EEC when applicable. The products fulfil the requirements according to the following standards: Cellular Phones and Accessories in Combination: ETS 300 342-1 EMC for European digital cellular telecommunications. Accessories Without Direct Connection to a Cellular Phone: EN 50081 Electromagnetic compatibility, Generic Emission Standard EN 50082 Electromagnetic compatibility, Generic Immunity Standard. Third edition (May 1998) This manual is published by Ericsson Mobile Communications AB, without any warranty. Improvements and changes to this manual due to typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Ericsson Mobile Communications AB at any time and without notice. [. . . ] Enter the first letter of the name by pressing the appropriate numeric key as many times as required (see Table 2 for all characters). Enter the next letter when the cursor has moved to the next letter position. The number of letters the name can have is SIM card dependant. Press YES when you have finished enter the name. If you want to store the phone number in the storage position suggested in the display, go directly to step 5. If you want to store the number in a different position, press CLR to erase the position number displayed and enter another number. Press YES to confirm the position number. If you have selected a position number that is already occupied, Overwrite?Press YES to overwrite or NO to return to the position number and change it. Storing Numbers in Phone's Memory Follow the same procedure as storing a phone number on the SIM card up to step 4. When you are prompted to set a storage position, press # once to enter ¤ character (which indicates storage in phone memory) and twice to have the phone suggesting the first free storage position. Press YES to confirm the storage. International Numbers If you intend to use your phone book both at home and abroad, you should store all phone numbers as international phone numbers, i. e. with the international prefix + and the country code before the area code (without any leading zero) and the number. · To enter the plus prefix, press and hold the zero until you see the plus in the display. Speed Dialling The phone numbers that your store in positions 1­9 on the SIM card can be called by entering the position number and then pressing YES. You should, therefore, save positions for 1­9 for important numbers. LZT 126 1352/x R2A 13 EN Recalling Phone Numbers You can recall a phone number any time from either the SIM card or the phone memory. You can recall the phone number by either the name or the storage position. From SIM Card 1. Press YES to call the number, or scroll until you find the number you want to call and press YES. 4. Press YES to call the number, or scroll until you find the number you want to call and press YES. · Press CLR or NO to return to the standby display with the number showing. Deleting Storage Position 1. Choose the name you want to delete, press and hold CLR. Press YES at the Erase prompt. Recalling by Name 1. Press CLR to erase any digits from the display. Enter either the full name of the first letter and press YES. The first name that matches the letter string is displayed. Press the * key to see the storage position. [. . . ] Twelve characters can be entered at the most. Different Settings for Each Line It is possible to have different settings for each line, for example, the ring signal, call diverts, call bars and call waiting function. LZT 126 1352/x R2A 25 EN The Call Time/Call Cost This chapter describes how you can keep track of the call time and time cost. About Duration of Calls Your phone is capable of keeping track of the following: Total Calls: This feature shows the total time of all calls in hours and minutes since the meter was last set. Outgoing Calls: This feature tracks the time of all your outgoing calls in hours and minutes since the meter was last set. Last Call: This feature tracks the duration of your last call in minutes and seconds. The duration of the call appears in the display after a call is finished. [. . . ]