User manual ESCALADE SPORTS G01850

[. . . ] These numbers are located on the product, packaging, and in this owners manual. Your Model Number _______________________ Your model number is located on the original carton, this owners manual, and under the table. Please retain these instructions for ordering parts. G01850 IMPORTANT!READ THIS MANUAL ALL THE WAY THROUGH BEFORE BEGINNING TO PUT YOUR GAME TABLE TOGETHER! [. . . ] AT LEAST TWO ADULTS ARE NEEDED TO PUT THIS GAME TABLE TOGETHER! © 2002 Escalade Sports 2 For Customer Service Call 1-866-556-2759 © 2002 Escalade Sports 3 For Customer Service Call 1-866-556-2759 © 2002 Escalade Sports 4 For Customer Service Call 1-866-556-2759 © 2002 Escalade Sports 5 For Customer Service Call 1-866-556-2759 CAUTION: On the following page you will be assembling the main cabinet of your soccer table. Because your table has no exposed hardware, you want to make sure you have your end panels and side panels aligned correctly BEFORE you put the corner posts and legs on and flip the table over. Failure to align these pieces now could result in a timely re-alignment later. REMEMBER TO START ALL HARDWARE BY HAND BEFORE YOU TIGHTEN ANY OF THE HARDWARE © 2002 Escalade Sports 6 For Customer Service Call 1-866-556-2759 1. Find a clean, level place to begin the assembly of your game table. We recommend building the table on the box top to protect the parts during assembly. 2. Place one side panel P1 upside down with the finished side facing out as shown. The ball entry hole will be closest to the floor. To ease assembly, push the rubber bushings on the rods up against the men. Figure 1 3. Choose one team to be color # 1 and one team to be color # 2. The handle end of the rod has a hole close to the end of the rod. There will be four handles (one team) on each side of the table. Remember, the goalie rod is always in your left hand when the table is in the upright position and you are working upside down so it will be opposite during assembly. 4. Once you are sure you have the players set up correctly, slide the other side panel P1 on the other end of the rods as shown. 5. Set the playfield P3 onto the assembly with the graphics facing down. Figure 2 6. Attach the two end panels P2 as shown in Figure 3 using bolts H3 and washers H4. Remember to start all bolts by hand first before you tighten anything. SEE CAUTION ON PAGE 6 OF THIS MANUAL MAKING SURE END PANELS ARE STRAIGHT TIGHTEN ALL HARDWARE AT THIS TIME. 7. Center the playfield and secure to the end panels using screws H7. Place the playfield support braces P12 on the playfield and attach to the side panels using screws H10. DO NOT OVER TIGHTEN SCREWS. Figure 3 © 2002 Escalade Sports 7 For Customer Service Call 1-866-556-2759 8. Carefully slide the corner posts P7 into the corners as shown in Figure 4. Use caution not to damage the laminate on the side and end panels as you slide the corners on. Make sure you have the screw holes in the corner post oriented as shown so they will be accessable. 9. Attach the corner posts P7 to the side and end panels with screws H5. Figure 4 10. [. . . ] Attach the ball entry cup P8 with screws H5 as shown in Figure 7. 14. Attach the handles P6 to the rods using screws H8. 15. Attach the manual scorers P11 to the top of the end panels with screws H6 as shown in Figure 7. Figure 7 16. Attach the cup holders P13 to the top of the end panels with screws H9 as shown in Figure 7. © 2002 Escalade Sports 9 For Customer Service Call 1-866-556-2759 PRODUCT PARTS LIST Part # H1 H2 H3 H4 H5 H6 H7 H8 H9 H10 H11 H12 P1 P2 P3 P4A P4B P5 P6 P7 P8 P9 P10 Description 3/8 x 5-1/8 Bolt 3/8 Washer 1/4 x 2 Bolt 1/4 Flat Washer 5/8 Round Head Screw 1-1/4 Flat Head Screw 1" Flat Head Screw 3/16 x 3/4 Flat Head Bolt 5/8 Flat Head Screw 1-3/4 Flat Head Screw Leg Leveler Cross Bar Side Panel End Panel Playfield Left Leg Right Leg Ball Runner Rod Handle Corner Post Ball Entry Cup Ball Catcher Goal Qty. [. . . ]