User manual ESET NOD32 ANTIVIRUS POUR NOVELL NETWARE

[. . . ] In this case, it is only a single action ­ after it is completed, the NOD32. NLM module is removed from memory. ­ NODUP. NLM ­ module providing a virus signature database update for the modules AMON. NLM and NOD32. NLM. 2. Installation Create a directory named, for example NOD32, on volume SYS: and copy files from the installation packages for the ESET NOD32 Antivirus for Novell into it. It is recommended to enable automatic startup of AMON. NLM and NOD32. NLM after each start of the server. [. . . ] The opposite switch is: onreadonwrite+ (default setting) Files are tested at the moment when a command to create/modify is detected. The opposite switch is: onwriteonrename+ (default setting) Files are tested at the moment when a command to rename is detected. The opposite switch is: onrenameall (default setting) All files are tested. Otherwise, if the parameter allis used, only extensions defined by the Eset Company are tested. notify When an infiltration is detected, AMON sends a message to the user who attempted to access the infected file (using the NetWare Message PopUp Service). When an infiltration is detected, AMON sends a message to all users in the list. It is possible to list more users ­ in this case, use commas to delimit them ­ see the example above. Other parameters: pattern log logappend logrewrite clean rename delete heur heursafe heurstd heurdeep These switches are identical to those used in module NOD32. NLM. They are described below (when entering parameters, always omit the hyphen). NOD32. NLM To run the NOD32 diagnostic scan or clean, enter the command as follows: LOAD SYS:/NOD/NOD [parameters] [path list] If [path list] is not entered, NOD32 will automatically scan whole disk. -h -help Displays list of parameters with descriptions. -subdir+ (default setting) Enables testing of subdirectories. The opposite switch is: -subdir-pack+ Enables testing of internally compressed files. The opposite switch is: -pack- (default setting) -arch+ Enables testing of archives (ZIP, RAR, ARJ. . . ). The opposite switch is: -arch- (default setting) -pattern+ (default setting ­ recommended) Enables testing using virus signatures. The opposite switch is: -pattern-heur+ (default setting ­ recommended) Enables detection using a heuristics method. The opposite switch is: -heurThere are three levels of heuristics analysis sensitivity: -heursafe -heurstd (default setting ­ recommended) -heurdeep Actions to take after an infiltration is found can be modified with the following parameters. The parameters can be suitably combined with each other. For example, parameters -clean -delete provide that an infected file, which cannot be cleaned, will be deleted. In case of the module AMON. NLM, not using any of the three fol- ESET NOD32 Antivirus for Novell Netware Server lowing parameters will result only in blocking access to infected files. [. . . ] [directory_with_NLM_modules] is optional in case the file NOD32UP2. NLM is located in the directory together with files NOD32. NLM and AMON. NLM. Possible parameters: -update Provides NOD32 updates (otherwise, available updates will be displayed only). -period=n This parameter triggers update attempts every n minutes. We recommend updating every hour (-period=60). [. . . ]