User manual ESSENTIELB EDVI 23

[. . . ] Table induction EDVI23 CONTENTS Safety information Safety instructions Product description Daily use Hints and tips 2 4 6 8 10 Care and cleaning Troubleshooting Installation Technical data Energy efficiency 12 12 15 17 18 Subject to change without notice. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. [. . . ] Heat setting , 1-2 3-4 5 6-9 The hob deacti‐ vates after 6 hours 5 hours 4 hours 1. 5 hour Activating and deactivating Touch for 1 second to activate or deactivate the hob. Automatic Switch Off The function deactivates the hob automatically if: • all cooking zones are deactivated, • you do not set the heat setting after you activate the hob, • you spill something or put something on the control panel for more than 10 seconds (a pan, a cloth, etc. An acoustic signal sounds and the hob deactivates. Remove the object or clean the control panel. Let the cooking zone cool down before you use the hob again. The comes on and the cooking symbol zone deactivates automatically after 2 minutes. € you do not deactivate a cooking zone or change the heat setting. After some time comes on and the hob deactivates. The relation between the heat setting and the time after which the hob deactivates: The heat setting Touch to increase the heat setting. Touch and at the same time to deactivate the cooking zone. Automatic Heat Up If you activate this function you can get a necessary heat setting in a shorter time. The function sets the highest heat setting for some time and then decreases to the correct heat setting. To activate the function the cooking zone must be cold. To activate the function for a cooking zone: touch ( comes on). Immediately touch until the correct heat setting comes on. Power function This function makes more power available to the induction cooking zones. The 8 function can be activated for the induction cooking zone only for a limited period of time. After this time the induction cooking zone automatically sets back to the highest heat setting. refer to “Technical information” chapter. To activate the function for a cooking comes on. Or Minute Minder You can use this function as a Minute Minder when the hob is activated and the cooking zones do not operate. [. . . ] Before the installation Before you install the hob, write down the information bellow from the rating plate. The rating plate is on the bottom of the hob. connection cable • The hob is supplied with a connection cable. € To replace the damaged mains cable, use the cable type: H05V2V2-F which withstands a temperature of 90°C or higher. [. . . ]