User manual ETHINK KL8-3H-BAA6

[. . . ] KL8-3H-CAA6/KL8-3H-BAA6 KL8-3H PROGRAMMING INSTRUCTIONS 1key note Figure 1. 1: Conventional panel structure Figure 1. 3: with TV / DVD's DC12V power mask map " " " + " Frequency up-searching / Minute " Frequency down- searching/ Hour " Volume up " "The total on/off & setting confirm " "Radio / CD input key Blower on/ Off & Temperature Mode Shift www. ethink-spa. com 1 KL8-3H-CAA6/KL8-3H-BAA6 " " " " - "Volume down " Radio memory / lock button " Radio searching / setting "Long circulation cleaning " " " " "Pool lights key "Surf pump 1 key "Surf pump 2 key " Setting Of circulation Cleaning & pump 3 " "Preheat setting & Heater On/ Off " "Temperature setting key Note: Only part of the blue button in the shutdown state in order to operate. 2Functional overview 16KW features the largest heating thermostat, pre-heating function, temperature display and setting function. [. . . ] 6Long cycle time cycle of cleaning and cleaning function. 724-hour clock display and setting function. 8With all the settings down memory parameters. 9Fahrenheit and Celsius temperature switch function. 13Three-phase or single phase, optional 110-120VAC or 220-240VAC. 14When the use of "CD" when there is all the way synchronous AC power output for DVD or TV 15Three power control mode. 3Instructions 1When the initial powersemi-bright backlightLCD displays the current clockand display the current temperaturesuch as sensor open / short circuit shows "E1" Parts of the radio frequency display shows "- - -" indicates that the system is turned off pre-heating and cleaning cycle in a closed state Figure 3 normal temperature display Figure 4 Sensor Open / Short show www. ethink-spa. com 2 KL8-3H-CAA6/KL8-3H-BAA6 2Lock operation: This feature is optional for function30 minutes without key operation or shutdown state click " "Keykey lock to start "Key to open the lock button In the "LOCKED (key lock)" state even by the second" then"LOCKED" signs disappear 3The operation of the clock settings: In the waiting state and pre-heating & circulation cleaning is no setting up or no working Press " "or" "Key to enter the clock settingsand at this time " symbol is no longer " flashingand the hours and minutes appear flashing In the clock settingsand every time" " "Button to increase the 1 hour press and hold "Key will be for increased hours Hour adjustment range is0 ~ 23 In the clock settingsand every time" " Keyincreased by 1 minutehold down the " Key will be for increased minutesMinute adjustment range0 ~ 59 Set up to wait for 6 seconds after the completion of the system clock set automatically from the state " 4Set up the operation of circulation cleaning: Can only be set once a day circulation cleaning cycle whether or not to start the clean cycle? [. . . ] In the LCD can be at a glance See the figure below ON OFF Figure 7 Pre-heating is turned on Figure 8 Pre-heat the closure of All the settings of pre-heating must be in the waiting stateat this time will be displayed on the LCD"- -" 1 By " " Key the state to enter the pre-heating set when the LCD on the "ON" signs indicate that "PREHEAT" Flashing signs will appear the same time clock time pre-heating start working At one time flashing toobut " no flashing is " see Note 2 Again" 1 "Key Closed setsee Note www. ethink-spa. com 4 KL8-3H-CAA6/KL8-3H-BAA6 2 Press " "(Minutes keys) and" "(Hours key) that can change "Pre-heating start " Key working time" Every time" " Keyincreased by 1 minutehold down the" will be for increased minutesMinute adjustment range 0 ~ 59 Every time" " Button to increase the 1 hourpress and hold" increased hoursHour adjustment range is0-23 3 " " Key will be for "Key to switch to the pre-heating time for the continuing work of the set stateLCD " key displays the time at least 10 minutes duration will not be flashing the Every time " an increase of 10 minutes every time " " increase in 1 hoursthe longest continuous working hours for 19 hours and 50 minutes After the time set to open access to the next step 4 Then click " " To enter a state of temperature settingLCD on at this time there will be " Key to change the set temperatureTemperature range "SET" signsaccording to " www. ethink-spa. com 5 KL8-3H-CAA6/KL8-3H-BAA6 15 ~ 42 5 After all the set and then click " status from the pre-heating " Button to confirm the system automatically set the *** Note *** 1, pre-heating of all the settings and work must be in the waiting state 2, please refer to LCD is the display "ON" or "OFF" shows "ON" said pre-heating is turned on when the pre-heating start working time and the current settings at the same clockit will start pre-heatingShown as "OFF" at any time when it will not start pre-heating 3, set in the entire pre-heating process the constant temperature furnace and water pump will not start the work cycle 6pre-heating of the work: When real-time clock and pre-heating setting start working time consistentpre-heating is set to "ON" and the bathtub with waterit will start the pre-heatingcirculating pump and automatic constant temperature system work at the same timeLCD display position on the countdown clock time " are no longer flashing " Work in the pre-heating processwhen the end of the countdown timethe system automatically shut down pre-heating At this point you can also " " Closed pre-heating ***Note*** 1, when the temperature is too low (less than or equal to the water temperature)although the start of pre-heatingbut the constant temperature furnace and the circulation pump will not start 2, each state (no waterstill waterflowing water) switching time of 30 seconds 7the work of circulation cleaning: When the real-time clock and the setting start working time of circulation cleaning consistent the circulation cleaning is set to "on" the mark" " of LCD panel is on and the bathtub with water it will start the circulation cleaning this point LCD display on the part of the countdown At time clock " are no longer flashing " All the surf PUMPS and BLOWER will activate working time is 30 seconds the Synchronized to start circulating pumpOzone after 15 minutes of each work will be shut down for 15 minutes In the course of the circulation cleaning when the countdown to the end or " close the cycle of cleaning " Key to 8on / off operation In the waiting state by " " " Key to enter the working stateState in the working state by " Can enter the waiting stateLCD display can be seen whether the state boot? OFF OFF Figure 8waiting state Figure 9working state www. ethink-spa. com 6 KL8-3H-CAA6/KL8-3H-BAA6 9the operation temperature settings: In working statethe temperature settings can operateEvery time " temperature increases 1 hold down the " to increase until 42 Again " 15 ~ 42 " Keyset the " Letting goand set the temperature continued " Key the temperature to 15 Set temperature range: set 10radio and CD operation: OFF Figure 11The frequency of the radio onto 105. 2MHZ location 3 (memory) the frequency of location3 (105. 2MHz) put the current transfer I " time by " RADIO CD RADIO CD " Key for the radio and CD's on key can only be turned on to operateThe first " Open radiothe second time by " RADIO RADIO CD " close radioat the same time CD to open CDthe third time by " " close radioalso bear in CD , In the radio turned onLCD displays the current radio frequency and the size of the current volume , In the radio turned on the statethrough " frequency In the radio to open the statethrough " CLOSE "and" " Change the current " key out of the radio frequency storage Row by " CLOSE " Key to a different location to check out the frequencyWhen the position of non-data the show "- - -" MEM the radio to open the state In through" MEM " key frequency of the current is store The Row by " " Key to keeping the frequency of the former to a different locationKeep up to 10 unitsrespectively for 0-9 By " + "and" - " Keys to change the size of the volume 11the operation of surf pumps: KEY of "Pump1/2/3" are control surf pump1/2/3Key of "Pump 3"are control pump3 When the surf pump is twoThe Pump3 are circulation pump at the same time All surf PUMP will auto off when working 1 hour later 12long circulation cleaning: At any time by" " Key to on / off a long circulation cleaningAfter a long work cycle patterns and cleaning cycle time is the samesurf pump & blower will be activated within 30 minutes www. ethink-spa. com 7 KL8-3H-CAA6/KL8-3H-BAA6 every timeworking time is 30 seconds ozone work for 15 minutes15 minutes for clearance Water surf PUMPS and BLOWER is turned onozone can not workcirculating pump is turned offthe ozone can not work 13 the bottom light steps: The first by " " Key to open the underwater lights color slowly changes the second the " The closure of the time by " " The color of the current fixed the third time by " underwater lights 14constant temperature heating steps: 1), in the pre-heating time to the pre-heating case opened or by" heating system thermostat "Key can be turned on the 2 When heating the normal opening for the time by " " Key to open the heaterthe circulation pump will work automatism 3)heating thermostat open the furnace is turned on when the thermostat has been circulating pump rotation 4)such as temperature set to 35 when the temperature reached or exceeded 36 the heater shut down 5 seconds after circulating pump will stop working (cleaning pump did not start the case) and when the water temperature at or below 34 circulating pump restart and re-open the heater 15the operation of blower: Button " " Control of the wind pump on / off Blower is activatedas in the absence of circumstances the work of 20 minutes will be automatically closed 16Fahrenheit and Celsius temperature switch: In the waiting state by " switch " Button temperature in Fahrenheit and Celsius temperature the 17when the pool water, the three-way water pump and thermostat systems are not activated, but the LCD display on the corresponding symbol will be flashing. [. . . ]