User manual EWT CS5 COMFORT

[. . . ] €… Page 26 27 27 33 34 35 36 37 39 40 41 42 43 44 45 46 47 Thank you for purchasing this EWT® wet/dry vacuum cleaner. Feel confident that with EWT® you are obtaining a high quality product engineered for optimal performance. This wet and dry vacuum cleaner is capable of picking up liquids and dry materials. This EWT® product carries a limited two (2) year warranty against defects in workmanship and materials from date of purchase under normal household use. [. . . ] Undo the 2 container clasps which hold the upper part (Fig. Remove the accessories from the container (Fig. Replace the container and insert the 2 feet with rollers. Check that they are pushed in correctly (Fig. To assemble the 2 large notched wheels; slide the bar which will hold the two wheels in the corresponding location on the bottom of the vacuum cleaner. Place a washer, then the wheel, then another washer on the other side of the wheel. Fasten by threading the hook into the hole located on the bar. Finally, fit the orange wheel cover (Fig. For dry vacuuming, install the supplied cartridge filter and dust bag (Fig. For wet vacuuming, install the supplied foam filter (Fig. Align the top section with the clasps, and snap into place by applying pressure until clasps latch into place (Fig. Hook the clamps into the upper section and let them snap into place by pressing the clamps downwards (Fig. Place the large end of the hose on the front air intake stub on the tank (Fig. Choose the desired accessories and push onto the suction tube (Fig. Use the air-leak slider that is included on the handle section (Fig. Plug the power tool into the “Integrated Socket” on the vacuum cleaner. Plug the vacuum cleaner into the mains (Fig. After using and cleaning the appliance, store the accessories by attaching them to the corresponding holders on the vacuum cleaner. 35 STARTING UP Image A: Positions Position “ “: Start Position “ Position “ “: Prise Confort: Power is controlled by the power tool. €: Stop Image B : Integrated socket Power tools such as: drills, saws or sanders up to max, 2200W can be plugged directly into the integrated electrical socket (21) on the vacuum cleaner. Connect the hosepipe (Ø35mm) to the dust extraction outlet on the power tool using the adaptor supplied for the tool. (You will find other suitable adaptors in specialist and DIY stores). [. . . ] Install the cartridge filter over the filter cage with the flat end of the filter towards the vacuum power head. Carefully push filter in until it stops against the power head (Fig. 4) and tighten down by turning retainer clockwise, do not over tighten (Fig. Replace the power head on to the container. [. . . ]