User manual F-SECURE POLICY MANAGER 9.0 ADMINISTRATOR GUIDE

[. . . ] Managing more than 5000 hosts requires P4 3 GHz processor or faster. Memory: 512 MB of RAM. Managing more than 5000 hosts requires 1 GB of memory. Disk space: Display: 200 MB of free hard disk space. Minimum 16-bit display with resolution of 1024x768 (32-bit color display with 1280x1024 or higher resolution recommended). Managing more than 5000 hosts requires a 100 Mbit network. Network: 10 | F-Secure Policy Manager | Introduction Main components The power of Policy Manager lies in the F-Secure management architecture, which provides high scalability for a distributed, mobile workforce. [. . . ] This message will disappear when the Installation editor is closed. The Installed version field displays the currently installed product version. Failed Completed (Empty field) · If a domain is selected, the Progress field displays one of the following: <number> hosts left - <number> installations Number of hosts left and number of failed failed installations. Click the button in the Progress field for detailed status information. Completed The installation or uninstallation operation succeeded on all hosts. 46 | F-Secure Policy Manager | Using Policy Manager Console (Empty field) No operations are active. The Installed version field displays all currently installed product versions. 3. When all required version numbers are selected, click Start. The Installation editor launches the Installation wizard, which queries the user for the installation parameters. The Installation editor then prepares a distribution installation package that is customized for the specific installation operation. The new package is saved on Policy Manager Server. Note: The Start button is used to start the installation operations selected in the Version to install field. If the Installation editor is closed without first clicking the Start button, then all changes will be discarded. Because the installation operation uses policy-based triggering, you must distribute new policy files. The policy file will contain an entry that tells the host to fetch the installation package and perform the installation. Note that it may take a considerable length of time to carry out an installation operation. This may happen if an affected host is not currently connected to the network, or if the active installation operation requires a user to restart his host before the installation is completed. If the hosts are connected to the network and they send and receive policy files correctly, then there could be a real problem. The host may not be correctly acknowledging the installation operation. In any case, it is possible to remove the installation operation from the policy by clicking Stop all. This will cancel the installation operations defined for the selected policy domain or host. It is possible to stop all installation tasks in the selected domain and all subdomains by selecting the Recursively cancel installation for subdomains and hosts option in the confirmation dialog. The Stop all button is enabled only if the current host or domain has an installation operation defined. Any subdomain operations do not affect the button state. [. . . ] Close the connections before trying to open connections with another user account. 1069 1722 1219 Error messages Error message Description The required privilege is not granted for the current By default even the administrator does not have a account and should be added manually. required Act as part of operating system privilege on the Policy Manager Console machine. Without this privilege, Windows NT does not allow FSII to authenticate the entered user accounts. To add this privilege to administrator's account on Policy Manager Console, use Windows NT User Manager Policies User Rights. [. . . ]