User manual FAGOR 2HF-11E

[. . . ] Before using the oven for the first time . You are now the proud owner of a FAGOR oven and we would like to thank you for the confidence you have placed in us. FAGOR offers a complete range of high quality and eco-friendly products that are designed to work hard while consuming less. We strive to bring energy efficiency to the forefront with products that consistently deliver on that promise. [. . . ] 24 WARNING: Never clean the rear plate or the side panels with oven cleaners. Clean the side walls on the inside of the oven while it is still warm using hot water with a little soap; dry the walls carefully with a soft cloth. For in-depth cleaning or if the dirt is particularly difficult to remove, we recommend the use of specialised oven-cleaners, following the manufacturer’s instructions. Only ever use specialized oven-cleaners on a cold oven. Helpful Tips: • Enable the interior lamp to illuminate the oven cavity while cleaning. To do so: turn the temperature selector to the “0”position and the function selector to any function, the light will then be on. € If you want to clean the glass cover protecting the oven lamp: unscrew the cover and clean it, preferably with washing liquid. Once it is clean, replace the lamp cover. 25 Model 5HA-196 X • In order to remove the oven door, follow these steps described below: Note: Doors cannot be removed on side opening models 5HA-200 LX and 5HA-200 RX. Rotate the stirrups (or catches) of the hinges as illustrated by the arrow. The stirrups (catches) then lock the hinges to allow for removal. Close the oven door gently until you hear the catch engage;once you reach the position of the catch, take hold of the door with both hands and continueto push it closed while pulling upwards at the same time to lift the hinges fromtheir slots. Align the hinges with their slots until they hook into place, as indicated. Open the door fully, and the door will then be correctly installed. 26 • It is possible to fold down the broil element in order to clean the ceiling of the oven. Press it in towards the back of the oven. Re-inserting the element after cleaning: 1. Press the element’s rod towards the back of the oven and hook the element back into place in its support. Accessories Soak the accessories immediately after use in a mild dish washing detergent. Food residue can be easily removed by scrubbing with a sponge or a soft brush. Side Supports The supports may be removed for cleaning. to do so , follow the steps described below: 1. [. . . ] 37 d Cancellation of timer functions If you wish to cancel all the timer functions set, press the button for a few seconds. The symbols corresponding to these functions will turn off to indicate that they are not active. If the oven is on at the time, then it will continue operating manually once the timer functions have been cancelled; if you want to switch it off, turn the selector function to the “0”position. WARNING: Switching the oven off by turning the selector function to the “0”positioncancels all the timer functions except the “Beeper” function as this works with the oven on or off. [. . . ]