User manual FAGOR B-440P

[. . . ] Do not use the appliance if the cable or plug are damaged. Do not leave the cable hanging over the side of the table or work-surface. [. . . ] ⷠTo avoid electric shock, do not submerge the motor unit in water or hold it under a running tap · Do not touch or pull the electric cable with wet or damp hands or feet. The appliance should be unplugged during the attachment and removal of accessory. ⷠAlways unplug the appliance before cleaning and after use. Before connecting the appliance, ensure that blending attachment is correctly inserted and wait until the motor has fully stopped before removing it. Do use or place any part of this appliance on or near hot surfaces (gas or electric hobs or ovens). Attaching and detaching the blending attachment All attaching and detaching operations should be done when the appliance is unplugged. To detach the blending attachment from the motor unit, unscrew it in an anticlockwise direction, as shown in fig. If you wish to continue using the appliance after this time has elapsed, wait a few minutes to allow the motor to cool Do not hold the blender still while in operation. Move in a circular motion around the bottom of the pan or bowl, starting in the middle and then moving out to the sides. Switch off the motor before removing the blender from the ingredients. Always unplug the appliance before cleaning. Detach the blending attachment from the motor unit, and clean it under the faucet or submerge it in soapy water. [. . . ] ⷠYou should not allow the appliance to function continuously for any longer than 20 seconds for models B-340P and 345M, or 3 At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. [. . . ]