User manual FAGOR FIS-810

[. . . ] 28 BEFORE CALLING YOUR AFTER SALES SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 PARTS OF THE APPLIANCE AND THE COMPARTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BEFORE USING THE APPLIANCE Safety Instructions · If the model contains R600a-see name plate under refrigerant (the coolant isobutane), naturals gas that, is very environmentally friendly but also combustible. When transporting and installing the unit care must be taken to ensure that none of the refrigeration circuit components become damaged. [. . . ] Children should be supervised to ensure that they don't play with the appliance. · If the supply cord is damaged it must be replaced by the manufacturer or service agent or appointed qualified person. · Do not defrost the appliance with other electrical devices (i. e. · Do not operate any electrical appliances inside the refrigerator. · Do not touch the cooling surfaces while the appliance operates, especially with wet hands, because the skin may stick to cold surfaces. · The appliance is not intended for use by people (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they don't play with the appliance. · If the supply cord is damaged it must be replaced by the manufacturer or service agent or appointed person. UK - 24 - Warning: Do not use mechanical devices or other artificial means to accelerate the defrosting process. Do not use electrical appliances in the food storage of the appliance. Keep the appliance ventilation openings free. Do not damage the refrigerator's refrigerant circuit. Switching On the Appliance · Before switching on, place the appliance on upright position and wait at least three hours without moving the appliance. This will give the refrigerant circuit time to settle and operate efficiently. · Clean the appliance thoroughly, especially in the interior, before use (See Cleaning and Maintenance). · Installation of the appliance and electrical connections must be carried out by a qualified technician, in accordance with the Installation Manual and local regulations. · Installation procedure into the kitchen unit is given in the Installation Manual. This product is intended to be used in proper kitchen units only. · The appliance must be connected with a properly installed fused socket. Power supply (AC) and voltage at the operating point must with the details on the name plate of the appliance (name plate is located on the inside left of the appliance). · Insert the plug into a socket with an efficient ground connection. If the socket has no ground contact or the plug does not match, we suggest you to call an authorized electrician for assistance. · Manufacturer is not responsible for failure to complete the ground connection as described in this booklet. [. . . ] Replace the light cover and after waiting 5 minutes plug the unit. UK - 28 - PART 5. BEFORE CALLING YOUR AFTER SALES SERVICE If your refrigerator is not working properly, it may be a minor problem, therefore check the following. The appliance does not operate, Check if; · There is a power failure, · The mains plug is not properly plugged in, or is loose · The thermostat setting is on position "0", · The socket is defective. To check this, plug in another appliance that you know which is working into the same socket. [. . . ]