User manual FAGOR I-200TS 02-08

[. . . ] Which cooking zone should you use based on your cookware?Using the "child safety device" _________________________________________ · During initial use ____________________________________________________ · We have designed this cooking hob for use by private persons in their homes. These cooking hobs are meant to be used exclusively for cooking beverages and foodstuffs and do not contain any asbestos-based materials. Ensure that the power cables of any electrical appliances plugged in close to the hob are not in contact with the cooking zones. [. . . ] If the display flashes, your cookware cannot be used with induction cooking. You can also use a magnet to test the cookware. If a magnet "sticks" to the bottom of the cookware, it is compatible with induction. Preferably use the following types of cookware: - Stainless steel with thick trimetal or "sandwich" base. The diameter of the cookware base must be equal or superior to the printed zone Do not leave an empty pan on a cooking. Do not leave a pan containing hot fat or oil unattended on a cooking zone. A higher setting is necessary in the event of: - abundant quantities - cooking with uncovered cookware - use of a glass or ceramic pot. A lower setting is necessary in the event of: - cooking food that tends to burn easily (begin with a low setting, as it can be increased if necessary). - overflow (remove the cover or the pot then lower the setting). To end cooking, place on position 0, leaving the cookware in place to use the heat accumulated (this way you will save energy). Use a cover as often as possible to reduce heat loss through evaporation. The cooking zones set automatically, they switch on and off to maintain the selected power. This way, the temperature remains consistent and suited to the food you are cooking. You can then choose the desired power level. If you do not select a power level, the cooking zone will automatically turn itself off. Press the start/stop button for the cooking zone used or the power "-" button until 0 is displayed. Press the + or - power button to adjust the power level from 1 to P (maximum power). When it is switched on you can move directly to maximum power "P" by pressing the "-" button. Use the button to select the cooking zone on which you would like to use the timer. If you press this button several times, a rotating symbol will show which cooking zone the timer is being used for. The timer may only be used for one cooking zone at a time. the timer functions when the cooking zone in question is in use. [. . . ] Do not touch glowing cooking zones, burn risk. Avoid hard shocks from cookware: The vitroceramic glass worktop is very sturdy; however, it is not unbreakable. Do not place any hot lids flat on your cooking hob. a suction effect may damage the vitroceramic surface. [. . . ]