User manual FARSTONE RESTOREIT PROFESSIONAL EDITION 7.1

[. . . ] RestoreIT® Professional Edition User's Guide Copyright Notice Copyright© 2006 FarStone Technology, Inc. No part of this publication may be copied, transmitted, stored in a retrieval system, or translated into any language in any form or by any means without the expressed written permission of FarStone Technology, Inc. FarStone grants you the right to use one copy of the enclosed software program ("SOFTWARE") on a single computer. If the SOFTWARE is installed on a network, or more than one user can run the SOFTWARE at the same time, you must purchase an additional license for each additional user or computer. [. . . ] another hard drive, another computer on the network or CD/DVD disc) to restore your system. Insert a recordable CD/DVD in your recorder. In Pre-OS Mode, select the Source hard drive in the upper pane, and then select the Source Partition(s) you want to back up in the lower pane. Click Browse to select the recorder and enter the name of the image. RestoreIT Pro will automatically eject the disc after burning succeeds. Note: if the image file is larger that a single CD/DVD the original disc will be ejected and you will need to insert another blank disc to continue. Using Recovery CD/DVD to restore your computer To restore your system from a Recovery CD/DVD, simply insert the Recovery CD/DVD disc into the CD/DVD-ROM and reboot your computer. The restoration process will be done automatically. Note: Make sure you have set Boot from CD-ROM option in the motherboard BIOS settings. If you have modified the disk structure after you have created the disc or your hard drive has physically crashed, it cannot perform an auto-recovery and will boot into RestoreIT Pro Pre-OS Mode. You can then select a disk image to perform a restoration to an earlier state. 3-7. 2 How to Restore Individual Files from an External Complete Backup If you need to restore an individual file or folder from an External Complete Backup or a hard drive image, simply pick out the file or folder from the preview option and you can restore the selected files without restoring the whole partition/disk. Just mount the image file as a temporary partition and copy the file or folder needed. mount an External Complete Backup as a partition Select Advanced Functions and then click Mount Image. Select Mount an image as a partition and click Next. Select the image file of the External Complete Backup Point. Select the partition containing the file or folder you wish to restore, and select a drive to mount. Click Next to start mounting the temporary partition. Click OK after the partition is successfully mounted. Now you can see the mounted drive in Windows Explorer. (Drive U: in this case) Now you can browse the drive and copy the desired file or folder to your specified location. After you have finished restoring an individual file or folder, you can dismount the temporary partition. Follow the steps below to dismount the drive: 1. [. . . ] If the "Software" is an upgrade from other "Software", whether from us or another supplier, you may use or transfer the "Software" only in conjunction with the upgraded "Software", unless you destroy it. If the "Software" is an upgrade from FarStone, you may only use that upgraded "Software" in accordance with this License. Where a database is included with the "Software", you acknowledge that it is licensed only in connection with the use of the "Software" to perform disk creation, and that the database and all data derived there from must be maintained in confidence in accordance with the provisions of Section E of this document. This License does not grant you any rights to distribute or disclose such a database or data contained therein. [. . . ]