User manual FARSTONE TOTAL BACKUP RECOVERY ADVANCED SERVER

[. . . ] Total Backup Recovery Advanced Server User's Guide Copyright Notice No part of this publication may be copied, transmitted, stored in a retrieval system or translated into any language in any form or by any means without the expressed written permission of FarStone Technology, Inc. FarStone grants you the right to use one copy of the enclosed software program ("SOFTWARE") on a single computer. If the SOFTWARE is installed on a network, or more than one user can run the SOFTWARE at the same time, you must purchase an additional license for each additional user or computer. Trademark FarStone® is a trademark of FarStone Technology, Inc. [. . . ] Then, copy all the files of Boot folder from directory of your exported PXE image to your root directory. Select a tsize option for the TFTP Server. 5. 1. 3. 4 Configuration of DHCP Server Set the Boot File as boot\wdsnbp. com. Configure the Boot Server with the same IP address of your TFTP Server. Create a new port for DHCP Server (The port can be named with any name). Then, set IP Address to be the IP Address of the TFTP Server, such as 192. 168. 0. 1. 5. 1. 3. 5 Configuration of Client PC Enter the BIOS and set the boot mode as LAN Boot. You will be prompted to press F12 within 3 seconds to launch PXE booting process. the 50 In the Recovery Manager, specify your network settings (Refer to 5. 2. 8. 1) and restore your computer. 5. 2 Recovery Manager Main Console After you enter the T Recovery Manager, you will see the following window. 5. 2. 1 Quick Start Back Up Computer(s) ­ Click here to back up partition(s) or the entire hard drive for your system. Return to a System Snapshot ­ Click here to restore from a specified system snapshot. Restore Your Computer ­ Click here to restore from a complete backup point. Data Shredding (Eradication) US DoD Standard Complied ­ Click here to 100% clean your data by wiping hard drive contents beyond recovery. 51 5. 2. 2 Backup Computer(s) 5. 2. 2. 1 Back up My Computer in Recovery Manager 1. Enter a name for your new Complete Backup, and click Next. Select the partition(s) or the entire hard disk to back up, and click Next. Tip This backup performed in Recovery Manager is not supported by Universal Restore. 4. Enter the storage path and click Goto, or select a destination location on a hard drive, USB storage medium, or a network location to store the image file. Some optional settings will be displayed if you click Advanced; these include: compression mode, password protection, image split, integrity check, backup description, backup priority, and network connection speed. Review the information and settings that have been specified. Click Next to launch the backup process, or click Previous to modify setting(s). Click Finish to return to main console. 5. 2. 3 Return to a System Snapshot 5. 2. 3. 1 Return to a System Snapshot in Recovery Manager 1. Click on Return to a System Snapshot icon to display a list of System Snapshots. The first System Snapshot listed will be the most recently created snapshot. Select the date you want to restore to from the calendar on the left pane and select System Snapshot of that day you would like to restore on the right pane and click Next. [. . . ] Why do I have to authenticate (license) Total Backup Recovery on a Client PC after I restored it from a System Snapshot?A: Only if you restore from the initially created System Snapshot, all data from the backup point you select is recovered, including your old authentication status. If that authentication status shows the Client as unlicensed, you'll have to re-enter the serial number. Which partition types does Total Backup Recovery 7 Advanced Server recognize? [. . . ]