User manual FARSTONE TOTALRECOVERY PRO

[. . . ] TotalRecoveryTM Pro User Guide Copyright Notice No part of this publication may be copied, transmitted, stored in a retrieval system or translated into any language in any form or by any means without the expressed written permission of FarStone Technology, Inc. FarStone grants you the right to use one copy of the enclosed software program ("SOFTWARE") on a single computer. If the SOFTWARE is installed on a network, or more than one user can run the SOFTWARE at the same time, you must purchase an additional license for each additional user or computer. Trademark FarStone® is a trademark of FarStone Technology, Inc. Microsoft, Windows® and MS-DOS® are registered trademarks of Microsoft Corporation. [. . . ] Click Finish to return to the main console. 4. 3. 3 Restore Your Computer To restore a partition or the entire hard drive, please do the following: 1. Select Restore, and click Restore Your Computer. Select a backup image from the list, or click here to select an image file stored on a network share. Select a Complete Backup point or any Incremental Backup point to restore from, and click Next. If you want to restore your entire physical disk drive, click One-Click Restore, then click Restore to begin the restoration process; or click No to exit. 33 5. Select Do not use Universal Restore, and click Next. Select to restore a single partition or the entire hard drive, and click Next. Click OK to return to the original location, or click Cancel to select another location. Select a destination partition or a destination hard drive to be restored from the image file, and click Next. To restore a single partition, skip to step 10. To restore the entire hard disk, please select a restore option. Select the checkbox if you would like to modify the destination partition size. b. Do not check the box if you have multiple systems or a hidden partition. If you selected option a, double click the partition capacity to be resized from the list. If you selected option b, skip to step 10. When it displays the structure of the destination partition, double-click the highlight and modify its size, and click Next to continue. Tip The restoration process will require your computer to reboot into the FarStone Recovery Environment. 11. Click Next to start the restoration after confirming the source and the destination. Click Yes to begin the restoration process. Then Click OK to enter the FarStone recovery environment to complete the restoration process automatically. Your computer will restart to complete the restoration. After that, it will reboot into Windows automatically. [. . . ] Does TotalRecoverytm Pro Provide support for Windows® advanced power management?A: TotalRecoverytm Pro supports all Windows® advanced power management features (Standby, Sleep, Hibernate). Why was my System Snapshot deleted automatically?If there are two operating systems on your computer with only one of the systems installed with TotalRecoverytm Pro, when you enter the operating system which does not have TotalRecoverytm Pro installed and modify the hard disk data, the system snapshot will be deleted automatically. [. . . ]