User manual FARSTONE VIRTUALDRIVE PRO 12.0 FOR WINDOWS XP-VISTA-2000-SERVER 2003

[. . . ] VirtualDrive Pro 12. 0 VirtualDrive Pro Version 12. 0 for Windows® XP, Vista, 2000 & Server 2003, Server2008, Windows 7 ® User's Guide VirtualDrive Pro 12. 0 Copyright Notice No part of this publication may be copied, transmitted, stored in a retrieval system or translated into any language in any form or by any means without the express written permission of FarStone Technology, Inc. FarStone grants you the right to use one copy of the enclosed software program ("SOFTWARE") on a single computer. If the SOFTWARE is installed on a network, or more than one user can run the SOFTWARE at the same time, you must purchase an additional license for each additional user or computer. Trademark FarStone®, VirtualDrive®, VirtualDrive Network and VirtualDrive Professional are trademarks of FarStone Technology, Inc. Microsoft®, Windows® and MS-DOS® are registered trademarks of Microsoft Corporation. [. . . ] Currently, Microsoft Windows 2000 (SP3), Windows XP and later versions support UDF discs. Format CD-ROM Mode 1: Data is stored in sectors with each sector holding 2, 352 bytes of data. For Mode 1 CD-ROM data storage, the sectors are further broken down. 2, 048 bytes are used for the expected data, while the other 304 bytes are devoted to Sync, Header, EDC (Error Detection Code) and ECC (Error Correction Code). CD-ROM Mode 1 is used for error-intolerant discs such as software, game discs and documentation discs. Create Time Use the date and time of the original file: Sets the date and time stamps of the files and folders on the burned disc as the date when the source files or folders were created. Use the current data and time: Sets the date and time stamps of the files and folders on the burned disc as the date and time when the disc was burned. 18 VirtualDrive Pro 12. 0 Use this time: Lets you specify a date and time stamp for the files and folders on the burned disc. Burning a Project to Disc 1. Set the Default Recorder to a physical CD/DVD recorder in your computer. Choose either of the following methods to launch the Burning Setup window: a. Select File Burn from the menu bar, or; b. A Burning Setup dialog box will display. Choose your burning settings and click Record. Note If the Auto-run function of your recorder is enabled, an Auto-run warning dialog box will appear before the Burning Setup dialog box is displayed. Click OK to end the burning process. Using Multiple Discs for a Project Burning Data onto Multiple Discs VirtualDrive Pro supports split-volume. When your data exceeds disc capacity, VirtualDrive Pro can burn the project onto multiple discs. Later, you will need to insert only the first volume of a multiple disc set to view and retrieve data. Create a Data CD/DVD project in CD/DVD Burning or Easy Backup. When you burn the project to disc, VirtualDrive Pro will automatically divide the data and prompts you to tag each volume. Once the first volume has been burned, VirtualDrive Pro will prompt you to insert more discs, as needed. Note: Only DATA CD/DVD projects can be burned onto multiple discs and only when the file system of the disc is set as an ISO 9660 disc. You can set the disc file system in the Disc properties / File System area. When you insert the first volume of a multiple disc set, the integrated tool Retriever will run automatically. [. . . ] Click Save Now. 5. 4 Removing a RAM Disk If you would like to free up the memory used by your RAM disk or modify the file system, drive letter, and disk space of your RAM disk, you will need to remove the RAM disk in use. In the Virtual Hard Drive Pro Console, select Remove a RAM Disk. Click Delete Now. 5. 5 Exploring a RAM Disk 1. In the Virtual Hard Drive Pro Console, select Explore a RAM Disk. [. . . ]