User manual FAURE FBA7340

[. . . ] User manual Refrigerator FBA7340 Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 4 5 5 6 Care and Cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 What to do if. . . _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Environmental concerns _ _ _ _ _ _ _ _ _ _ _ _ _ 12 Subject to change without notice Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety. [. . . ] For proper storage of the food in your refrigerator and particularly in the coldest area, ensure that the temperature indicator is displaying "OK". If "OK" is not displayed, the average temperature in the area is too high. Adjust the temperature controller to a colder setting. Since the "OK" display is in black, it is difficult to see if the temperature indicator is poorly illuminated. Correct illumination makes it easy to read. Each time the temperature controller is adjusted, wait for the temperature inside the appliance to stabilise before checking whether another adjustment is required. Only adjust the controller gradually and wait at least 12 hours before checking and perhaps adjusting it again. After putting fresh food into the appliance or after opening the door repeatedly or for a long period, it is normal for the indicator not to show "OK"; 5 wait at least 12 hours before readjusting the temperature controller. If the evaporator of the refrigeration compartment (wall at the bottom of the appliance) has an abnormal covering of ice (appliance too full, high ambient temperature, thermostat too high, frequent door opening), gradually move the thermostat control to a lower setting until there are once more periods when the compressor stops. The automatic defrosting of the refrigerator compartment will not work correctly unless the compressor stops from time to time. Thermostat requires adjustment Correct temperature Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be placed at different heights. OK Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired. Gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required. Removable Drawer Fruit, vegetables and bottles should be placed in the special bottom drawer provided (see the diagram). Helpful hints and tips Hints for energy saving · Do not open the door frequently or leave it open longer than absolutely necessary. Use the special cleaner provided, which you will find already inserted into the drain hole. Periodic cleaning The equipment has to be cleaned regularly: · clean the inside and accessories with lukewarm water and some neutral soap. · regularly check the door seals and wipe clean to ensure they are clean and free from debris. Do not pull, move or damage any pipes and/or cables inside the cabinet. Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as this will damage the surface and leave a strong odour. Clean the condenser (black grill) and the compressor at the back of the appliance with a brush or a vacuum cleaner. This operation will improve the performance of the appliance and save electricity consumption. Take care of not to damage the cooling system. Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason it is recommended that the outer casing of this appliance is only cleaned with warm water with a little washing-up liquid added. After cleaning, reconnect the equipment to the mains supply. Periods of non-operation When the appliance is not in use for long periods, take the following precautions: · disconnect the appliance from electricity supply · remove all food · defrost4) and clean the appliance and all accessories · leave the door/doors ajar to prevent unpleasant smells. If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure. 4) If foreseen. 7 What to do if. . . Warning! [. . . ] · Remove the upper pin and the door. · Loosen the lower pin. Ventilation requirements The airflow behind the appliance must be sufficient. 50 mm min. 200 cm2 Installing the appliance Caution!Make sure that the mains cable can move freely. [. . . ]