User manual FAYTECH TOUCHSCREEN-PC

[. . . ] When any Product is returned for examination and inspection, or for any other reason, Customer will be responsible for all damage resulting from improper packing or handling and for loss in transit, notwithstanding any defect or nonconformity in the Product. In all cases faytech has sole responsibility for determining the cause and nature of failure, and faytech's determination with regard thereto shall be final. If it is found that faytech's Product has been returned without cause and is still serviceable, Customer will be notified and the Product returned at Customer's expense. In addition, a charge for testing and examination may, in faytech's sole discretion, be made on Products so returned. [. . . ] continuous production and product improvement is our primary goal. For this reason, there may be improvements in our products which are not yet included in this user's guide. Differences between your product and this user's guide are generally related to specification changes and product improvements. If you have any questions or suggestions, please contact our support team or visit our website at www. 0 COM1 VGA-Out 12V DC-IN COM2 additional screwable 12V DC-IN; PIN1: +12V DC PIN 2: GND PIN 3: free Power on/off W-Lan connector Mic-In W-Lan connector 220V power supply Touch pen, manual and installation CD of Windows or Linux Touch-PC with VESA 100 220V power supply CD for installation of Windows or Linux Touch pen On the bundled driver CD are Windows and Linux drivers for our faytech Touch PCs included. Com to see whether there are updated drivers. If you purchased the system with a SSD, a current Ubuntu image is already installed with which you can become familiar with the hardware and the use of the touch-panel. Com The touch software manual is also downloadable on our website. To start, connect your faytech-touch PC simply with the in delivery included AC adapter or use an equivalent 12V DC power source with at least 5A DC. to start the system , press the On / Off button. If you have bought a faytech touch PC without hard disk and RAM, please follow the following instructions. In the following, the most important BIOS settings are explained. Please note that the BIOS is a special BIOS for PC's with built-in display solutions. Accordingly, it can occur after adjustments to the BIOS that you see no image on your monitor. For this reason, only experienced users should make changes to the BIOS. If the system is wrongly adjusted, proceed as described in the following: press (even if you see no image) on a connected keyboard the Delete key until you are sure you are in the BIOS. The system will reboot and you should have on an external monitor again a picture. The major graphic settings to use the touch PCs internal built in monitor: l Intel l Video (Intel IGD) Control Sub-Menu l IGD - Boot Type: VBIOS Default l IGD ­ LCD Control Sub-Menu l IGD ­ LCD Panel Type: choose the original resolution of your monitor Make sure that you save your changes before leaving the BIOS (F10). To the small size of our touch-PC solutions an installation of a conventional hard drive due to potential heat problems is not recommended for model sizes less than 15 ". The subsequent installation of RAM and hard disk is complicated, for these activities the mainboard must first be taken off. [. . . ] Please attach in the contact e-mail/fax your invoice and what problems you are experiencing. In reply, you will receive an e-mail/fax with your RMA number and additional information. For accessories like cables, adaptors or power supplies which are not working, we can usually send you a replacement before receiving the damaged goods. For a defective product, we try to check and solve the problem within 3 days after receipt. [. . . ]