User manual FENDER CONTEMPORARY PERFORMER BASSES

[. . . ] Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug from the AC receptacle. The mains plug of the power supply cord shall remain readily operable. WARNING ­ To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. [. . . ] Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment. 25 cm) of unobstructed air space behind the unit to allow for proper ventilation and cooling of the unit. CAUTION ­ For rack mounted power amplifiers, keep all wiring and materials away from the sides of the unit and allow the unit to cool down for 2 minutes before pulling from a rack enclosure. Amplifiers and loudspeaker systems are capable of producing very high sound pressure levels which may cause temporary or permanent hearing damage. Use care when setting and adjusting volume levels during use. fCC Part 15 Compliance Statement (for digital products , as applicable) - Part 15. 21: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. such modifications could void the user's authority to operate the equipment. NOTE: You must turn to activate the Time/Rate, Mix and Depth knobs after you switch between effects, otherwise the knob positions will not show the actual settings for the newly selected effect. The Chorus effect in the VM amplifier will deliver a chorus effect with Mix set near the center of its range, or a true pitchshifting vibrato effect with Mix set to "10. *Footswitchable: You can activate this control remotely from the included 4-button footswitch!Your new Fender® amplifier comes equipped with the highest quality tubes available, sourced from various manufacturers all over the world. Because of occasional irregularities in supply, the specific tube type used in each amplifier is subject to change without notice. When replacing output tubes, please note the specific tube markings on the original tubes factory supplied with your amplifier. For example, 6L6 output tube types used by Fender include, but are not limited to: 6L6GC; 6L6WXT; 6L6C; 6L6GE; etc. The installation of a different type may require significant adjustment by a qualified technician to avoid reduction in performance and tube life. Additionally, Groove TubesTM sorts and tests many of our output tubes, and paints them with a color-coded label. [. . . ] Additionally, Groove TubesTM sorts and tests many of our output tubes, and paints them with a color-coded label. If your amp came supplied with, for example, White-labeled 6L6WXT tubes, then a new set of White 6L6WXT tubes will be the perfect direct replacement. If you have questions or concerns, contact your Fender dealer or authorized service center. POWER CORD SOCKET--Connect to a grounded A/C outlet using the supplied power cord, in accordance with the voltage and frequency ratings specified on the rear panel of your amplifier. [. . . ]