User manual FERRARI 328 GTS WORKSHOP MANUAL

[. . . ] The first star is extinguished after entry of the first digit. The second star is extinguished after entry of the second digit, etc. The unit switches on automatically after entry of the 4th digit if this and all other digits have been correctly entered. Note : It is essential that the CODE CARD be kept in a safe place outside the vehicle. [. . . ] Pre-select the desired PTY code using the multifunction button " " or " ". Turn the right rotary control within the next 10 seconds. The previous program is selected if no station with the selected PTY code is receivable. The unit switches to station button plane if there is no further actuation within 10 seconds. FM 1/FM 2 station - retrieve/store Store: 10 frequencies or programs can be stored on each of wavebands FM 1 and FM 2. Press multifunction button for 2 - 4 seconds in order to store the desired station or program. Retrieve: Press multifunction button "1 - 0". The frequency is displayed if the station cannot be identified. 12 USEnglisch. bk : RUNDFUNK. fm Seite 13 Freitag, Februar 1, 2002 10:33 AM Radio Operation AM station - retrieve/store Retrieve: Press multifunction button "1 - 0". Store: 10 stations can be stored under station buttons. Search for the desired station and press the multifunction button until the station button number is displayed. AM / FM autostore Select desired waveband. Then press multifunction button "AS" repeatedly until AS-SEEK is displayed. The 10 stations with the best reception are stored under the station buttons in order of quality. The drive components in the cassette mechanism also become soiled. For this reason the cassette mechanism should be cleaned from time to time. The prompt CLEAN appears on the display after each 30 hours' running time. Use a cleaning cassette suitable for reverse operation for this purpose. The cleaning cassette should be removed again after 30 seconds. ! 18 USEnglisch. bk : CD. fm Seite 19 Freitag, Februar 1, 2002 10:33 AM CD/MD Changer Operation Compact Disc (CD) instructions Sound interruptions may occur if the CD is soiled. In order to ensure optimum tone quality, please note the following: Always touch the CD at the edges only. Keep the CD clean and never touch the surface. Protect the CDs against direct sunlight and from heat sources such as heaters, etc. Before playing, clean the CD with a commercially available cleaning cloth, wiping from the center outwards. Solvents such as petrol, thinners and other commercially available cleaners and antistatic sprays must not be used. Correct Incorrect Incorrect Correct Operational readiness of CD/MD changer If a CD/MD changer is connected to the car radio, this is ready for operation as soon as it has been loaded with the filled CD magazine or with MDs. Further operation is performed via the car radio control panel. 19 USEnglisch. bk : CD. fm Seite 20 Freitag, Februar 1, 2002 10:33 AM CD/MD Changer Operation CD magazine - load / unload In order to remove the CD magazine, open the sliding cover on the changer and press the eject button. [. . . ] Pressing the multifunction buttons " " or " " enables a choice between LED ON and LED OFF. GAL setting The GAL is a car radio control circuit which automatically adjusts the car radio volume according to vehicle speed. This results in compensation of the driving noise produced at higher speeds. Request user menu, then set GAL using the right rotary control. Pressing the multifunction buttons " " or " " enables a choice between GAL OFF and GAL 7. [. . . ]