User manual FESTOOL CTL44LE

[. . . ] - Do not suck in any sparks or hot chippings. - With the exception of wood dust, do not suck in any flammable or explosive dusts such as magnesium, aluminium etc. - Remove plug from mains socket when not in use and before maintenance work. - Do not pull plug out of mains socket by its cable. [. . . ] To ensure trouble-free functioning of the automatic cut-in, the operating pressure of the tool must be 6 bar. Follow the reverse order to close the appliance. You must raise the upper part slightly before depressing or disengaging the support. Changing the filter During the following procedure, take care not to raise dust more than is unavoidable. Wear a P2 breathing protection mask with health-hazardous dusts!: CTL 44 E/CTL 44 LE 452972 CTL 55 E 452973 - Open the vacuum cleaner, - Remove the used filter bag (see printed text on filter bag), - Dispose of the used filter bag in accordance with statutory requirements, - Thoroughly clean the dirt container (2. 1) for suction turbine (wipe down with a damp cloth), - Insert new filter bag (see printed text on filter bag). : 452923 Do not operate machine without a filter element. - Open the vacuum cleaner, - Remove the used filter element (see printed text on the filter element packaging), - Dispose of the used filter element in a sealed, dust-tight bag in accordance with statutory requirements, - Thoroughly clean dirt container (2. 1) for the suction turbine (wipe down with a damp cloth), - Fit a new filter element (see printed text on the filter element packaging), - Close vacuum cleaner. 3 Cleaning the filter element To clean, move the handle (2. : You need to clean the filter element only if you use the vacuum cleaner without a filter bag. Warning: Make sure that both upper-part pins are fully inserted in the recesses (1. 8), thus preventing the vacuum cleaner from rolling away unexpectedly. When work is complete, you can guide the extractor hose through the opening (4. Similarly, the mains cable can also be guided through the opening (4. 5 Application - A systainer can be fixed to the storage area (1. Tools or accessories can also be stowed on the storage area and in the storage compartments (1. 10) (487072) can be plugged into the opening (1. The suction hose is connected to the tool from above with the hose coupling. 11) (452921) makes the vacuum cleaner easier to move. Vacuum accessories) can be fixed to the push handle batten (2. [. . . ] Complaints can only be recognised if the tool is returned while still assembled to the supplier or an authorised Festool Customer Service workshop. Keep the Operating Instructions, Safety Instructions, Spare Parts List and purchase receipt in a safe place. Otherwise the respective, current warranty conditions of the manufacturer shall apply. Note Due to continuous research and development work, we reserve the right to make changes to the technical content of this documentation. [. . . ]