User manual FESTOOL TURBO 4001 BROCHURE

[. . . ] The lengths of 5 m or 6 m and the double-jointed system make operation extremely flexible while simultaneously allowing for a large action radius. Light and stable. This cross-section shows the stable interior. The profile structure gives the boom arm made of light aluminium its stability and high torsion resistance. The smoothwalled extraction channel integrated into the profile prevents dust deposits. Cleaning with high pressure. On a jet-air cleaning system, a rotating pneumatic nozzle clears the filter by blowing in air. [. . . ] For filter cleaning, the jet-air system works in two stages: if the turbine is in operation, cleaning is carried out for 6-7 seconds per minute. After the turbine is switched off, a subsequent cleaning cycle is also carried out for 10 seconds, in order to clean the filter and to prevent dust particles depositing on the filter. The filter has a degree of filtration of virtually 99. 9% and ensures that the exhaust air guided out is practically free of dust. On a stationary dust extraction system, the simple combination of boom arm ASA with energy box EAA and the individually adapted pipework ensure a large degree of mobility. The boom arm consists of a light aluminium construction, which is reinforced with struts on the inside. This enables it to remain stable, even with boom extensions of up to 6 m. The integrated energy box EAA ensures efficient and flexible layout of the workplace. This is because it offers connections for the power supply, compressed air and exhaust air. Here, you can quickly find a connection for all tools used for working on the paint, both pneumatic and electric. Two tools can be operated parallel to each other. The turbine is switched on and off by remote control via sensors in the interlocking bar system of both suction spouts. And because the entire supply is fed in from above, there are also no cables and hoses that could cause someone to trip up. Josè Vargas, Motor Mallorca, Spain: "It is important to us that we can rely on our tools at all times because we often have to perform continuous operation. The Festool dust extraction turbine is always ready for operation and it is also easy to operate. " Christine Rapp, Gewerbe Akademie Lahr, Germany: "We are continuously teaching new apprentices who are not always familiar with dust extraction systems. Therefore, a reliable and easy-to-operate dust extraction system is a must in our workshop. The powerful Festool dust extraction turbine has also proven itself in permanent operation thanks to its easy cleaning system. [. . . ] Simply visit the online shops of our system partner dealers and place your order. www. festool. com FESTOOL Minden Industrial Ltd. Edmunds Suffolk IP28 6RX England Telephone: Facsimile: 01284 760791 01284 702156 Art. -No. 057 314 E-mail: info@minden. co. uk http://www. festool. co. uk 1) Within the EU in accordance with the operating manual. [. . . ]