Detailed instructions for use are in the User's Guide.
[. . . ] AZ31
MAINBOARD MANUAL
DOC No. : M00402 Rev. : 25-11523-22
Notice
Handling Precautions
Warning: 1. Static electricity may cause damage to the integrated circuits on the motherboard. Before handling any motherboard outside of its protective packaging, ensure that there is no static electric charge in your body. [. . . ] The options are: Enabled (Default), Disabled. First Boot Device This feature allows user to select the boot device priority. The options are: Floppy (Default), LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3, ZIP100, LAN, Disabled. Second Boot Device This feature allows user to select the boot device priority. The options are: Floppy, LS120, HDD-0 (Default), SCSI, CDROM, HDD-1, HDD-2, HDD-3, ZIP100, LAN, Disabled. Third Boot Device This feature allows user to select the boot device priority. The options are: Floppy, LS120, HDD-0, SCSI, CDROM (Default), HDD-1, HDD-2, HDD-3, ZIP100, LAN, Disabled. Boot Other Device This feature allows user to select the boot device priority. The options are: Enabled (Default), Disabled.
3-4
BIOS Setup Swap Floppy Drive Allows you to switch the order in which the operating system accesses the floppy drives during boot up. The options are: Enabled, Disabled (Default). Boot Up Floppy Seek When enabled, assigns the BIOS to perform floppy diskette drive tests by issuing the time-consuming seek commands. The options are: Enabled (Default), Disabled. Boot Up Numlock Status When set to On, allows the BIOS to automatically enable the Num Lock Function when the system boots up. Gate A20 Option When set at Fast, allows a faster access response under Protected mode. The options are: Fast, Normal (Default). Memory Parity/ECC Check Enabling it will add a parity/ECC check to the boot-up memory tests. Set at Enabled only if the system DRAM contains parity. The options are: Disabled (Default), Enabled. Typematic Rate Setting The term typematic means that when a keyboard key is held down, the character is repeatedly entered until the key is released. The options are: Disabled (Default), Enabled. Typematic Rate (Chars/Sec) This feature is available only if the above item, Typematic Rate Setting, is set at Enabled. Sets the rate of a character repeat when the key is held down. [. . . ] INT Pin 1/2/3/4 Assignment This feature allows you to assign the PCI IRQ numbers for PCI slots. Selecting the default, Auto, allows the PCI controller to automatically allocate the IRQ numbers. The options are: Auto (Default), 3, 4, 5, 7, 9, 10, 11, 12, 14, 15.
PC Health Status
It allows you and technicians to monitor data provided by the BIOS on this mainboard. Current CPU FAN Speed / Current System FAN Speed These items allow end users and technicians to monitor data provided by the BIOS on this mainboard. [. . . ]
