User manual FISHMAN ADT-100-S

[. . . ] User Guide ADT-100-S Shell Mount Drum Trigger ® ADT-100-S Shell Mount Drum Trigger Thank you for your purchase of a FISHMAN product. Please read these instructions carefully. If you have any questions or problems, contact our Customer Service Department at 978-988-9665. PARTS LIST · FISHMAN ADT-100-S DRUM TRIGGER · DOUBLE-SIDED ADHESIVE · 1/4" JACK HOLDER CAUTION The ADT-100S is a sophisticated state state-of-the-art sensing device from which you can expect years of service. [. . . ] The shell must be dry and free of dust or other contaminants. Remove the release paper from one of the three adhesive squares provided and affix to the prepared surface of the shell. Make sure the adhesive square is set firmly in place. Remove the remaining piece of release paper from the 1" adhesive-bar square and place the trigger, "f" logo side up, in the center of the square. With the trigger in place, remove the release paper from the adhesive backed clamp and attach the clamp to the drum shell or to the drum holder so that the Jack will point downward when inserted in the clamp. BASS DRUM Because of possible cross-talk from rack mounted toms, optimum mounting location on bass drums is on the batter head about 2-3" from the rim. Follow the shell-mounting procedure, making sure that the surface of the head is clean and dry. DO NOT PLACE THE TRIGGER NEAR THE BEATER AREA. Because of the magnitude of constant vibrations in this area the trigger life could be considerably shortened. FINE TUNING The ADT-100-S tracks extremely well when mounted solidly in the proper location and if the sensitivity of the interface unit has been properly adjusted. However, double-triggering or Cross-talk from one drum to another can occur. A high volume live performance situation can cause interaction of the drum heads and the amplification system. We recommend reducing the input sensitivity on the interface unit or employing internal head dampers. Also, if the drums are not isolated or if stands are allowed to bang into them, cross-talk will occur. Try using some padding material or reinforcing your stands to accomplish better isolation of each drum. 3 Limited Warranty The FISHMAN ADT-100-S Shell Mount Drum Trigger is warranted to function for a period of One (1) Year from the date of purchase. If the unit fails to function properly within the warranty period, free repair and the option of replacement or refund in the event that FISHMAN is unable to make repair are FISHMAN's only obligations. [. . . ] FISHMAN TRANSDUCERS' technicians will determine whether the item is covered by warranty or if it instead has been damaged by improper customer installation or other causes not related to defects in material or workmanship. Warranty repairs or replacements will be sent automatically free of charge. If FISHMAN TRANSDUCERS determines the item is not covered by warranty, we will notify you of the repair or replacement cost and wait for your authorization to proceed. FISHMAN TRANSDUCERS 340-D Fordham Road Wilmington MA 01887 USA Phone 978-988-9199 · Fax 978-988-0770 www. fishman. com 009-025-001 10-00 ® [. . . ]