User manual FLAM DESIGN 68-64 DIMENSIONS

[. . . ] The second line of the display starts blinking. Press + repeatedly until your choice of CARD STOCK or LABELS appears on the second line of the display. The second line of the display starts blinking. Press Press + repeatedly until the second line of the display shows the Value (for envelopes, select COM-10 ENVELOPE) you wish to use. [. . . ] The setting is engaged and the second line of the display stops blinking. Provides straight-through, curl-free print path for transparencies, envelopes, labels and heavy paper. Sheets exit face up (for multi-page documents, select reverse order printing in your application Print dialog box). Always make sure the media setting matches the print media you are using. If you are printing a job on special media, you can temporarily load the media in a tray and change the media settings for that tray in the driver as you print the job. Print media settings can be made in the printer driver or in the printer menu. Media weight settings can be made in the printer menu or the printer driver. The ink on pre-printed letterhead stationery must be able to withstand 446°F (230°C) for 0. If you experience curling when printing a file in duplex mode, switch to 28-lb. Weights in this column are US Bond (see page 11 for more information). Print media must be able to withstand 446°F (230°C) for 0. If this does not clear the message, call your local service dealer. When this message appears, the printer stops after every 20 pages. To continue printing, you must open and close the top cover. Note If you have changed the LOW TONER setting to STOP, the ATTENTION light will blink and you must either replace the toner cartridge immediately or press the ON LINE button to continue printing. When this message appears, the printer stops after every 20 pages. To continue printing, you must open and close the top cover. (See the instructions supplied with the new image drum. Reduce the size of the file being printed (e. Install additional memory in the printer (see your on-line User's Guide for more information). The Job Accounting software has detected a print job from a user who is either · not authorized to print or · Trying to print a color job and only authorized to print black and white jobs. The user should contact the System Administrator to see if their authorization can be changed. [. . . ] The Job Accounting software has detected a print job from a user who is either · not authorized to print or · Trying to print a color job and only authorized to print black and white jobs. The user should contact the System Administrator to see if their authorization can be changed. Consult the dealer where you purchased your printer. For your nearest dealer, call 1-800-654-3282. [. . . ]