Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual FLAM DESIGN 75-71. We hope that this FLAM DESIGN 75-71 user guide will be useful to you.
Lastmanuals help download the user guide FLAM DESIGN 75-71.
Manual abstract: user guide FLAM DESIGN 75-71DIMENSIONS
Detailed instructions for use are in the User's Guide.
[. . . ] Mention of software products manufactured by other companies does not necessarily constitute endorsement by the manufacturer. While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. The most up-to-date drivers and manuals are available from the web site: http://www. okiprintingsolutions. com Trademark Information Oki and Oki Data are registered trademarks of Oki Electric Industry Company Ltd. Apple, Macintosh and Mac OS are registered trademarks of Apple Computers Inc. [. . . ] is a fixedspacing, scalable font.
Symbol Set A4 Print Width
PC-8
Sets the symbol set of PCL (see machine operator panel for complete list). Sets the number of characters for A4 paper. This is for 10-CPI characters when Auto CR/LF Mode is set to OFF. This menu is enabled only when A4 paper is selected in the menu that sets the print width of A4 paper in portrait orientation. Usually, such A4 paper print width is set slightly narrower than 8 inches (about 7. 93 inches). This setting cannot print 80 10cpi characters (only prints up to 78 10-cpi characters). 80 characters set at A4 Print Width widen the right and left margins. A PCL command selects or selects/deselects Auto CR/LF mode.
78 column 80 column
40 MPS710c User's Guide
ITEM PCL Setup (cont. ) White Page skip
SETTINGS On/Off
EXPLANATION Sets whether to eject a page without any data to print (blank page) upon reception of FF command (OCH) in PCL Mode. Sets action when CR code is received in PCL. CR: Carriage Return CR+LF: Carriage Return and Line Feed
CR Function
CR/CR+LF
LF Function
LF/LF+CR
Sets action when LF code is received in PCL. LF: Line Feed LF+CR: Line Feed and Carriage Return
Print Margin
Normal 1/5 inch 1/6 inch
Sets a non-printable area of paper. This function is available only with PS language jobs. Selects limitation to the toner layer thickness. If paper curl occurs in dark printing, selecting MEDIUM or LIGHT sometimes helps reduce this curl. Enable/Disable 100% output against the CMY100% TRC compensation. Ordinarily, the TRC compensation function holds control for the appropriate print density; thus 100% output is not always possible. Selecting ENABLE will enable 100% output in any individual color. The actual print, including the TRC compensation function is limited to an appropriate area. This function is for special purposes such as specification in CMYK color reduction in PS.
UCR
Low Medium High
CMY 100% Density
Enable/ Disable
CMYK Conversio n
On/Off
Setting to "OFF" will simplify the conversion process of CMYK data, which will reduce the processing time. This setting is ignored when Ink Simulation function is used. PS only
45 MPS710c User's Guide
ITEM Memory Setup Receive Buffer Size
SETTINGS Auto 0. 5 megabyte 1 megabyte 2 megabyte 4 megabyte 8 megabyte 16 megabyte Resource Save Auto Off 0. 5 megabyte 1 megabyte 2 megabyte 4 megabyte 8 megabyte 16 megabyte
EXPLANATION Sets the size of receive buffer
Sets the size of resource saving area.
HDD Setup This item is displayed only if a HDD (option) is installed.
Initialize
Execute
Initializes the HDD to the factory default setting. Machine performs partition-division, and initializes each partition. [. . . ] · Profile Assistant Helps you to load and manage color profiles. · NIC Setup Utility Use to set up the [printer network card. · Storage Device Manager Requires the hard disk drive, optional on some models. 94 MPS710c User's Guide
Download PCL macros, Postscript forms and bar codes to the printer hard disk drive for use in print jobs · Swatch Utility Print a color swatch and use the indicated RGB values to set up the color(s) of your choice in your graphics/design software application. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE FLAM DESIGN 75-71
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual FLAM DESIGN 75-71 will begin.