User manual FLAM ELEGANZA 44-100 DIMENSIONS

[. . . ] For additional information on these utilities, to help you make your selections, click The setup program does not automatically place an icon on your desktop. If you wish, you can drag and drop the icon on to your desktop for ease of future use. There are 5 main functions included in this software: · Allows you to change most of the same settings as you'd see on the MFP's operator panel, on a locally connected PC. Adds names, e-mail addresses, assign them to IDs (for scan to e-mail feature of MFP). [. . . ] If this is the case, a PIN (Personal Identification Number) is required to use the MFP. The PIN Manager creates PIN numbers and assigns them rights such as whether they can copy, print, scan to email, scan to network PC or fax. It enables the unit to receive one-key touch commands from a locally connected computer. Before using this MFP, a few basic settings have to be carried out. Ensure that you have the relevant permission/PIN numbers before starting. the Factory set default passwords/PIN are: Administrator PIN Network (web page) aaaaaa 000000 aaaaaa 4. Using the Down arrow key, scroll to Fax Setup and press Enter. Using the arrow keys and keypad, enter the time and date. Using the Down arrow key, scroll to Basic Setup and press Enter. Using the Down arrow key, scroll to Country Code and press Enter. Using the arrow keys, scroll to the country in which the MFP is situated and press Enter to confirm. The operation and functionality of this machine can be limited only to authorized personnel by the simple introduction of a 4-9 digit PIN (Personal Identification Number). The greater the number of digits in the PIN, the more secure it is. With Access Control set to Enable, the display reverts to the System Setup screen immediately following the setting change. If one of the functions such as Print, Fax Send or PC Scan is running however, the display will only revert to the System Setup screen when the task has been completed. When the MFP operation panel is left inactive for a prescribed length of time (Operation Timeout), the display automatically reverts to the Idle screen if Access Control is disabled. The numbers entered are not displayed on the Enter PIN ID screen, being replaced by '*'. Invalid PIN ID: If the PIN number entered is invalid, Incorrect Password is displayed for 3 seconds and the display reverts to the Enter PIN ID screen. To make the best of this MFP, the following configuration is required: The MFP has to be set up properly on your network to perform scan to e-mail and other functions. In order for other network devices to find the MFP on the network, the following network parameters have to be set: 1. Using the Down arrow keys, scroll to the Menu function and press Enter. Using the Down arrow key, scroll to Admin Setup and press Enter. [. . . ] When you send an e-mail to someone using this MFP it uses Simple Mail Transfer Protocol (SMTP) to transfer your outgoing e-mails to your SMTP mail server, and then send these e-mails to your recipients via the internet. The MFP can scan/copy/send document(s) using either the ADF (Automatic Document Feeder) or manually on the glass. If you want to scan/copy/send multiple pages, use the ADF. the ADF can hold up to 50 pages at one time. [. . . ]