User manual FLAM GMT 75-56 DIMENSIONS

[. . . ] Each product contains information technology that accurately processes date and time data between the years 1999 and 2000, and carries no issue for the September 9, 1999 (9999) programming concern. These products, when used in combination with products purchased from other manufacturers, whose products properly exchange data and time information, will accurately process the date and time. All future products are committed to meeting the same Year 2000 compliance. ENERGY STAR As an ENERGY STAR Partner, Okidata has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Quick Start Guide | E-3 E-4 | FLAMPAGE 10e Contents Overview Year 2000 Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Energy Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 8 Installing Toner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Using Legal Size Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Paper Exit Paths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Top Paper Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Rear Paper Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Choosing Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Printing the Demo and Menu Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Interfacing with your Computer . . . . . . . . . . . . . . . . . . . . . . . . . 14 Connecting the Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Turning on the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fasten the cable to the printer securely. Interfacing with your Computer Your printer has a high-speed, bi-directional parallel IEEE 1284 interface port. Purchase a cable marked IEEE 1284 compliant. To comply with FCC regulations, the cable must be shielded and UL and CSA approved. Consult your PC manual for details on cable requirements and interface ports on your computer. ! FLAMDATA has tested and approved the following bidirectional cable: Part Number 70000803. See Service and Support in the User's Guide for purchasing information. 2 Connect the other end of the cable to the proper connector on your computer. Fasten the cable securely to your computer. E-14 | FLAMPAGE 10e Turning on the Printer 1 Make sure the printer is off. Printer Software The CD-ROM provided with your printer includes printer drivers and the on-screen printer status monitor and operator panel required to use all the FLAMPAGE 10e features. Follow the steps in this guide to install the appropriate driver on your computer system. PO WER ON O OF F F Printer Drivers Printer drivers must be installed so your software application can communicate with your printer and support all of its features. 2 Plug the cord into the printer first, then into a grounded outlet. The FLAMPAGE 10e CD-ROM includes printer drivers for printing in the following Windows environments: · · · · Windows 95 Windows 98 Windows 3. x Windows NT 4. 0 If you are using DOS or another non-windows operating system, select a PCL-compatible driver. ! 3 Turn the printer on. It takes about 10 seconds for the printer to initialize and warm up, and for the Ready light on the operator panel to turn on, indicating the printer is ready to receive data. Quick Start Guide | E-15 No CD-ROM Drive? If you do not have a CD-ROM drive, there are three ways you can get access to a printer driver: 1 Visit the Okidata web site at http://www. okidata. com and download the printer drivers. 2 If you can locate a CD-ROM drive on another system, you can use the CD-ROM to create diskettes. [. . . ] (4) Access printer hardware and firmware information. (5) Select paper source, weight, size, transparencies. (6) Adjust lines per page, orientation, edit size, and select emulation (PCL, IBM®, EPSON®). (7) Set print output quality, darkness setting. [. . . ]