User manual FLAM MT PLUS 68 DIMENSIONS

[. . . ] Mention of software products manufactured by other companies does not necessarily constitute endorsement by Oki. While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. The most up-to-date manuals and/or drivers are available from: http://www. okiprintingsolutions. com Trademark Information Oki and Microline are registered trademarks of Oki Electric Industry Company, Ltd. Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corporation. [. . . ] Check Yes, I want to view the ReadMe File if you want to read Readme. You may be asked whether it is OK to change write permissions for the spool directory. Click Yes to allow the utility to be correctly installed. Select Add Printer on the Remote Print menu. to search for the IP address of a suitable printer on your network. Highlight the printer you will use and click OK. If your printer is not discovered, click Cancel and you can type the IP address directly at IP Address:. Enter an IP address at IP Address and click OK. A printer is added to the main window. 3. 16. Refer to the On-line Help for information on how to use the utility. Network configuration > 39 UNINSTALLATION 1. Select Start>Programs>Okidata>OkiLPR Utility>Uninstall OkiLPR Utility. Within Windows NetBEUI is used for file and printer sharing between computers. It provides a simple method of printing, but it does have limitations, and is not as robust as TCP/IP or IPX. Typically it is employed in small business or home networks. Microsoft Windows > 43 NETWORK PRINTER IP ADDRESS CONFIGURATION Use the Standard Set-up Utility to configure the IP Address, Subnet Mask and Gateway. NOTES: It will not be necessary for printers connected to a network using DCHP to use this setup method. Some steps may not display depending on the network protocols installed. 1. 2. Connect the printer to the network and turn on. Insert the CD-ROM into the CD-ROM drive. If it does not start, doubleclick \setup. exe (in the root directory) on the CD-ROM. Select the appropriate language and follow the on-screen instructions. Then select Install Admin Manager. 3. 4. 6. Microsoft Windows > 44 7. Select Oki Device Quick Setup and follow the on-screen instructions. Select the appropriate network card, using the Ethernet address to identify it, and click Next. [. . . ] Check Microsoft Network Client and NetBEUI have been added to the network section of the Windows Control Panel. Check the NetBEUI protocol is set to Enable. Check the factory setting of the workgroup name is PrintServer and the computer name is ML+ the last six characters of the MAC address. Check the computer name of the NIC is different from the computer name on the network. Troubleshooting> 78 ERROR WRITING TO PRN1 Check the printer is online. [. . . ]