User manual FLASH KIT THERMOFLASH DIGI 24 HF

[. . . ] Comfort temperature: this is the temperature for your hours of presence. ⷠReduced temperature: this is the temperature for your brief absences or during the night. It protects your dwelling from the risk of frost. The thermostat DIGI 24 HF Easy to install, easy to program, the kit DIGI 24 HF will allow you to control your heating system in accordance with your way of life. [. . . ] You are putting the device into operation for the first time. Press the button several times to obtain 6:00 :The time displayed advances by 30 minutes for each short press. 00) use the +/- buttons to advance or return and correct with the thermometer buttons. P4 = Blank programme allowing you to create 3 comfort temperature periods and 3 reduced periods. Set the time using the +/- buttons (the numbers run off more quickly when the button is pressed continuously). If you wish to change the time or the day, press the MODE button until the pointer L under the clock sign and continue as above for points and . You can check your programming: Press the PROG P1-P4 button until the P2 programme number flashes in the right side of the screen. Creating a P4 programme A 24-hour profile composed of 48 thermometers at the bottom of the display panel allows your programme composition to be easily viewed; A half-empty thermometer corresponds to 30 minutes at reduced temperature. You pass into automatic mode by pressing the MODE button until the pointer L appears under Auto. In automatic mode the clock thermostat adapts to your life style by running the programs you have selected. Manual mode transforms your device into a simple thermostat. It allows you to maintain a constant temperature in your dwelling (set to a temperature of between 5°C and 30°C). You can programme your DIGI 24 HF according to 4 programme settings: P1, P2 and P3 are prerecorded and cannot be modified. P4 is blank and allows you to create a personalized programme. If this corresponds to your life style, stay in automatic mode, otherwise, continue. Press the PROG P1-P4 button until the P4 programme number flashes in the right side of the screen. Your display panel indicates time as 0:00 and the first thermometer flashes on the 24-hour profile. 3 K Power: 2 standard LR6 alkaline batteries (to supply the product and the radio transmission) Operating range: 75 m from transmitter to receiver in a free field (operates over 3 building floors) Transmission frequence: 433. In automatic mode this very useful function allows you to modify ambient temperature temporarily. This modification ends with the next change in programmed temperature. [. . . ] Receiver is outside of transmitter's range: - move transmitter closer to receiver. The system does not start or does not stop: - the receiver or transmitter is disturbed by radio transmission (radio ham, TV monitor, cellular phone re-transmitter, etc. Various settings can be made on the back of the device (when it is not mounted). All electrical wiring must be carried out by a qualified person. [. . . ]