User manual FOCAL CHORUS V SUBWOOFERS SW 800 V & SW 700 V

[. . . ] Caution : to prenvent yhe risk of electric shock, do not remove cover (or back). Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. [. . . ] If a particular disposition of the room does not allow placement of the subwoofer in a corner, we recommend that you try different configurations until you find the best possible sound. Generally, the subwoofer should be placed along the front wall of a listening room. As bass frequency waves are omni-directional, the sound dispersion will not be affected if a piece of furniture or an object is placed between the subwoofer and the listening area. It is then possible to hide the subwoofer behind a piece of furniture as long as the bass frequency dispersion is not affected. Magnetic disturbance The subwoofer generates a magnetic field that may interfere with other sensitive household appliances. It is strongly advised to not place the subwoofer closer than 50cm (20") to your TV screen (fig. Frame geometry as well as colours can be severely distorted by a magnetic field if the loudspeaker is placed to close to the cathode ray tube. Generally, all sensitive media (audio tapes, video tapes, magnetic data storage, projector and CRTS overheadprojector) should not be placed close to any non-shielded loudspeaker. accessories for SW 800 V The Chorus SW 800 V include four decoupling spikes (cones). These spikes ensure a better stability, particularly if the floor is not perfectly flat and smooth. The spikes are adjustable in height with the supplied key (fig. When the "power" control is set on auto-mode, the subwoofer will automatically switch on as soon as an audio signal is detected. when set to "power on" , the signal detector is disable and the subwoofer is continuously on. Conversely, if no signal is detected during a period of about 3 minutes, the detector automatically set the subwoofer to standby mode. If you expect not to use the subwoofer for a long period, it is recommended to set the power selector to "off". In case of stormy weather, unplug the power cable. Quick set-up 1 - Connect the subwoofer to the power grid (electrical outlet). 2 - Set the power selector to "on". 3 - Connect the subwoofer to the amplifier according to one of the three methods mentioned above. Please note that the crossover is not available when the subwoofer is connected through the "Line Inputs LFE". Fine tune 1 - Adjust the bass level according to the other used loudspeakers. In order to find the appropriate settings, we advise you to use as many different music styles as possible. [. . . ] Guarantee cover extends at least to that granted by the legal guarantee in force in the country where the original purchase invoice was issued. Your Focal-JMlab product was developed and manufactured with high-quality materials and components which can be recycled and/or re-used. This symbol indicates that electrical and electronic equipment must be disposed of separately from normal garbage at the end of its operational lifetime. Please dispose of this product by bringing it to your local collection point or recycling centre for such equipment. [. . . ]