User manual FOCAL K2 POWER 130 KF

[. . . ] This ensures improved power handling, with detailed sound quality, low distortion even at high volume levels. chassis made from Zamak : inherently rigid and non magnetic. Voice coil wound on Kapton former : light-weight and powerful material ensures no deformation of voice coil. butyl moulded rubber surround suspension : excellent reliability even in the most extreme climates. [. . . ] The fixing location should also be strengthened where necessary. Panels should be strengthened to eliminate any unwanted vibrations. such vibrations will drastically reduce the overall performance. These drive units should be fixed and sealed to the baffle or location panel. The use of the foam gasket is advisable for correct air sealing. For added performance and to better reduce such unwanted vibrations and any other acoustical losses, we recommend the use of "Plain Chant". Easily positioned behind the woofer, on the metal work of the vehicle, "Plain Chant" soaks up vibrations as well as acoustic reflections. Beforehand always ensure that enough space is available for the magnet assembly so that it doesn't interfere with safety mechanisms or any other parts. In the case of not using the grilles supplied, it is important to ensure the speakers fit correctly. Ensuring there is enough depth behind the speaker has already been explained, but thought must also be given for the forward movement of the cone and surround assembly. The woofers from the K2 Power range can also be placed low in the "kick-panels" (fig. This is to further optimize the stereophonic staging. Woofer fixing Either cut the required hole or use the pre-fitted space. Where necessary, carefully push in the four fixing clips to fit together with the fixing screws. Carefully place the fixing ring, ensuring it lines up with the holes or fixing clip positions (fig. Fix the foam gasket to the back of the drive unit chassis. Add a small amount of glue where necessary so it remains in the correct position (lined up with the holes). Lower the drive unit above the fixing ring, so it remains in the correct position (lined up with the holes). don't forget to connect the cable to the connectors. Now lower the drive unit and screw in place with the four screws provided. Crossover installation Before you start, it is necessary to remove the clear plastic lid. Doing so enables access for adjustment, and fixing the unit in place. [. . . ] After which, the excellent performance of your K2 Power products will be fully appreciated. Conditions of guarantee All Focal loudspeakers are covered by guarantee drawn up by the official Focal distributor in your country. Your distributor can provide all details concerning the conditions of guarantee. Guarantee cover extends at least to that granted by the legal guarantee in force in the country where the original purchase invoice was issued. [. . . ]