User manual FORD EXPEDITION-2006

[. . . ] Table of Contents Introduction Instrument Cluster Warning and control lights Gauges 4 10 10 15 Entertainment Systems AM/FM stereo cassette with CD AM/FM stereo with in-dash six CD Rear seat controls Rear seat entertainment system Navigation system 18 18 23 28 33 47 Climate Controls Manual heating and air conditioning Automatic temperature control Auxiliary passenger climate control Rear window defroster 83 83 87 91 92 Lights Headlamps Turn signal control Bulb replacement 93 93 96 98 Driver Controls Windshield wiper/washer control Power windows Mirrors Speed control Message center 105 105 111 112 114 126 Locks and Security Keys Locks Anti-theft system 140 140 140 141 1 Table of Contents Seating and Safety Restraints Seating Safety restraints Airbags Child restraints 153 153 169 182 189 Tires, Wheels and Loading Tire Information Tire Inflation Tire Pressure Monitoring System (TPMS) Vehicle loading Trailer towing Recreational towing 204 206 208 221 227 234 240 Driving Starting Brakes Air suspension Transmission operation 242 242 246 252 255 Roadside Emergencies Getting roadside assistance Hazard flasher switch Fuel pump shut-off switch Fuses and relays Changing tires Lug Nut Torque Jump starting Wrecker towing 272 272 274 274 276 285 293 293 299 Customer Assistance Reporting safety defects (U. S. only) 301 307 Cleaning 308 2 Table of Contents Maintenance and Specifications Engine compartment Engine oil Battery Engine Coolant Fuel information Air filter(s) Part numbers Refill capacities Lubricant specifications 316 318 321 324 326 332 346 348 349 352 Accessories Index 359 361 All rights reserved. Reproduction by any means, electronic or mechanical including photocopying, recording or by any information storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company. Ford may change the contents without notice and without incurring obligation. [. . . ] Small amounts of sodium hydroxide may be present which may irritate the skin and eyes, but none of the residue is toxic. While the system is designed to help reduce serious injuries, contact with a deploying airbag may also cause abrasions, swelling or temporary hearing loss. Because airbags must inflate rapidly and with considerable force, there is the risk of death or serious injuries such as fractures, facial and eye injuries or internal injuries, particularly to occupants who are not properly restrained or are otherwise out of position at the time of airbag deployment. Thus, it is extremely important that occupants be properly restrained as far away from the airbag module as possible while maintaining vehicle control. Several air bag system components get hot after inflation. If the airbag has deployed, the airbag will not function again and must be replaced immediately. If the airbag is not replaced, the unrepaired area will increase the risk of injury in a collision. The SRS consists of: · driver and passenger airbag modules (which include the inflators and airbags), · one or more impact and safing sensors and diagnostic monitor (RCM), · a readiness light and tone · the electrical wiring which connects the components. The RCM (restraints control module) monitors its own internal circuits and the supplemental airbag electrical system wiring (including the 185 Seating and Safety Restraints impact sensors, the system wiring, the airbag system readiness light, the airbag back up power and the airbag ignitors). Determining if the system is operational The SRS uses a readiness light in the instrument cluster or a tone to indicate the condition of the system. Refer to Airbag readiness section in the Instrument Cluster chapter. Routine maintenance of the airbag is not required. A difficulty with the system is indicated by one or more of the following: · The readiness light will either flash or stay lit. · The readiness light will not illuminate immediately after ignition is turned on. · A series of five beeps will be heard. The tone pattern will repeat periodically until the problem and/or light are repaired. If any of these things happen, even intermittently, have the SRS serviced at an authorized dealer immediately. Unless serviced, the system may not function properly in the event of a collision. Safety Canopy system (if equipped) Do not place objects or mount equipment on or near the headliner at the siderail that may come into contact with a deploying Safety Canopy . Failure to follow these instructions may increase the risk of personal injury in the event of a collision. Do not lean your head on the door. The Safety Canopy injure you as it deploys from the headliner. could Do not attempt to service, repair, or modify the Safety Canopy system, its fuses, the A, B, or C pillar trim, or the headliner on a vehicle containing a Safety Canopy . 186 Seating and Safety Restraints All occupants of the vehicle including the driver should always wear their safety belts even when an airbag SRS and Safety Canopy system is provided. [. . . ] ENGINE DATA Engine Cubic inches Required fuel Firing order Ignition system Spark plug gap1 Compression ratio 1 Spark plug gap not adjustable 354 5. 4L V8 engine 330 87 octane 1-3-7-2-6-5-4-8 Coil on plug 0. 040­0. 050 inch (1. 02­1. 27 mm) 9. 85:1 2 1 Maintenance and Specifications VEHICLE DIMENSIONS Vehicle dimensions (1) Overall length (2) Vehicle width (Body) (2) Vehicle width including mirrors (2) Vehicle width with mirrors folded (2) Vehicle width with optional running boards (3) Overall height (with roof rack) (4) Wheelbase (5) Track - Front (5) Track - Rear 4x2 ­ inches (mm) 4x4 ­ inches (mm) 205. 8 (5228) 205. 8 (5228) 78. 7 (2000) 78. 7 (2000) 94. 2 (2392) 79. 9 (2029) 81. 7 (2074) 94. 2 (2392) 79. 9 (2029) 81. 7 (2074) 76. 7 (1948) 119. 0 (3023) 67. 0 (1701) 67. 3 (1708) 76. 6 (1944) 119. 0 (3023) 67. 0 (1701) 67. 3 (1708) 4 1 355 Maintenance and Specifications IDENTIFYING YOUR VEHICLE Safety Compliance Certification Label The National Highway Traffic Safety Administration Regulations require that a Safety Compliance Certification Label be affixed to a vehicle and prescribe where the Safety Compliance Certification Label may be located. The Safety Compliance Certification Label is located on the structure by the trailing edge of the driver's door or the edge of the driver's door. 356 Maintenance and Specifications Vehicle identification number (VIN) The vehicle identification number is attached to a metal tag and is located on the driver side instrument panel. Please note that in the graphic, XXXX is representative of your vehicle identification number. XXXXXXXXXXXXXXXXX The Vehicle Identification Number (VIN) contains the following information: 1. Brake system / Gross Vehicle Weight Rating (GVWR) / Restraint System 3. [. . . ]