User manual FOSTEX 4035

[. . . ] Renaming VOLUME LABEL Recognized as "REEL NUMBER" . New UTILITY Menu "Set SCENE&REEL (Set SCENE & REEL No. )?" . Change on "TC UBIT SEL" TC SETUP Menu . Selecting "SRNo. " as TC UBIT Information . [. . . ] LIST PLAY Function The LIST PLAY function allows to link multiple audio files recorded by the same condition (e. g. TR MODE, Fs, AUDIO FILE) and reproduce the files continuously while maintaining TC continuity. There are two LIST PLAY modes; One is the "LTC_Link" and the other the "SongLink" available on 4035. LTC_Link In the "LTC_Link" mode, based on the recorded LTC Start Time in each file, multiple files are linked and reproduced continuously. This mode should be used when the LTC address has to be matched in conjunction with other equipment such as a video camera. SongLink The "SongLink" mode links audio files in the file number ascending order (e. g. file No. 1 -> file No. 2 -> file No. 3 . . . ). LTC Start Time will be set according to the one recorded in the first link file (default setting: 01h00m00s00f) and the LTC will be jammed regardless of recorded LTC Start Time in the following linked files. This mode is convenient when reproducing multiple audio files continuously. CAUTION 1 In order to link multiple audio files recorded on 4035, each SW setting, audio file format (BWF or SDII), sampling frequency, resolution (quantization bits) and track mode (mono, stereo or multi) must be the same in all the files to be linked. CAUTION 2 The message "<<Silent Area>>" indicating no audio to be reproduced exists will be displayed on the 4035 FL display when in the following condition. · If there is an overlapping LTC address between the files in the LTC_Link mode, <<Silent Area>> is displayed while reproducing the overlapped latter file. · There are hidden files (deleted files) in the LTC_Link mode. · When the last linked file finishes reproducing. Presume that the following six files (including deleted File No. This indicates that the selected LIST PLAY mode is turned ON. 3) Press the [PLAY] key. Pressing the [PLAY] key allows to reproduce the linked multiple files. NOTE Pressing the [FILE SEL] key when the LIST PLAY mode is on allows to select either the "LTC_Link" or "SongLink" mode. 12 6-2. Confirming Linked Files Pressing the [SKIP/CURSOR >>|] or [SKIP CURSOR |<<] key allows to locate to the beginning of each linked file in the ascending / descending order respectively. When the files 001 ~ 006 are linked as shown in the drawing below, SongLink File No. 006 <<Silent Area>> 01h00m00s00f 01h00m30s00f 01h01m00s00f 01h01m30s00f 01h02m00s00f 01h02m30s00f by pressing the [SKIP/CURSOR >>|] or [SKIP CURSOR |<<] key, the followings appear on the 4035 FL display. LTC H M S F Press [SKIP/CURSOR >>|] key Press [SKIP/CURSOR |<<] key LTC H M S F Press [SKIP/CURSOR >>|] key Press [SKIP/CURSOR |<<] key LTC H M S F Press [SKIP/CURSOR >>|] key Press [SKIP/CURSOR |<<] key LTC H M S F Press [SKIP/CURSOR >>|] key Press [SKIP/CURSOR |<<] key LTC H M S F 13 6-3. Reprogramming PLAY LIST If you find that there are unnecessary linked files exist, you can reprogram the PLAY LIST by deleting them. 1) Turn off the LIST PLAY mode. If the LIST PLAY LED is lit solid, press the [LIST PLAY] key to turn the mode off. 2) Recall the File you would like to delete. Press either the [SKIP/CURSOR >>|] or [SKIP CURSOR |<<] key and recall the file you would like to delete. 3) Press the [SHIFT] key and then [SETUP] key to enter the UTILITY Mode. 4) Rotate the jog dial or press the [SKIP/CURSOR |<<] / [SKIP/CURSOR >>|] key to select the "Delete File?" menu. The following appears on the FL display. ("?" is flashing. ) Flashing 5) Press the [ENTER/YES] key. "Sure?" message starts flashing. Flashing 6) Press the [ENTER/YES] key. The file is deleted. CAUTION Even after unnecessary files are deleted, they can be restored by the "Restore DelFile?" UTILITY menu. This indicates that the files have not been completely erased from the DVD-RAM disk yet. However, if you optimize the DVD-RAM disk by the "Optimize Disk?" UTILITY menu, deleted files are completely erased from the DVD-RAM disk. After optimizing, they can be no longer restored. NOTE A deleted file before optimizing on 4035 is categorized as a "hidden file". It can be seen as a translucent file on a personal computer. [. . . ] The alphanumeric keys can be also used to change the IP Address. 4) Press the [ENTER/YES] key. Pressing the [ENTER/YES] key defines the change on the IP Address. 8-6-2. Gateway The Gateway should be set when the Gateway server exists in the network 4035 is connected. If there is no Gateway server exists, you do not have to set the Gateway. 1) Rotate the jog dial to select "Gateway? [. . . ]