User manual FOSTEX 454

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. "WARNING" "TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. " SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. Retain Instructions - The safety and operating instructions should be retained for future reference. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. [. . . ] · Note that the master word clock setting of the digital mixing console must match the recorder's sampling frequency. See the instruction manual of the digital mixing console for details. To execute the digital multitrack recording using a digital mixing console, see "Basic digital recording" on page "18" for details about the digital multitrack recording using a digital mixing console. Initial settings You need to reset all the controls on this recorder to their initial settings according to the controls and switches on the mixer before you proceed to the next step. This procedure is called "Initialize" in this Guide and in the Reference Manual. The buttons and switches on this recorder should be reset as shown below. Remember to "initialize this recorder" before you start a new session. Locate the top of the selected Program (ABS 0). Turn off AUTO RTN mode and AUTO PLAY mode. (AUTO RTN and AUTO PLAY indicators turn off. ) Turn off AUTO PUNCH mode. (The REHEARSAL and TAKE LEDs go off. ) The [STORE] key and [RECALL] key LEDs turn off. AUTO RTN CLIPBOARD AUTO RTN AUTO PUNCH AUTO PLAY IN OUT START IN OUT END PGM SEL EXIT/NO EXECUTE/YES 24TRACK DIGITAL RECORDER PREVIEW EJECT CHASE EDIT SETUP UNDO/REDO CHARACTER NEXT PREV LOCATE MEMORY DISP SEL STORE RECALL POWER 24bit 96kHz SHIFT TC READY TC GEN M. UNDO PREV TC NEXT TC TIME BASE SEL HOLD AUTO PUNCH REHEARSAL TAKE LOCATE VARI PITCH OPTICAL P. EDIT RECORD TRACK RECORD 6/14/22 7/15/23 8/16/24 TRACK SHIFT STOP PLAY REW F FWD 1/9/17 FOOT SW 2/10/18 3/11/19 4/12/20 5/13/21 ENVELOPE ALL INPUT ALL READY ACCESS 9-16 17-24 TRACK SHIFT CLIPBOARD PLAY LOCATE ABS 0 LOCATE REC END Turn off the [TRACK SHIFT] key LED. Set all [RECORD TRACK] select keys to "SAFE. " The track indicators (square frames) turn off. (The STOP button LED turn off. ) Turn off the Vari Pitch function. You can record eight different sound sources on this recorder simultaneously. <Undo and redo recording> If you make a mistake or you are not satisfied with the recording, you can "undo" recording. Refer to the "Undo and redo recording" section below. 16 Model D2424LVmkII Quick Operation Guide Undo and redo recording (single undo/redo) Everybody makes mistakes. If you make a mistake in recording, you can restore and re-do the data that existed before the mistake occurred. These functions are called "Undo" and "Redo, " and are executed by the [UNDO/REDO] key on the control panel. The Undo function enables you to cancel the latest recording or edit and restore the previous state. Using the Redo function after using the Undo function enables you to cancel the Uno operation and restore the latest recording or edit. These functions have some limitations as described in the <Note> below. As described earlier in "Formatting a new disk", if you format the disk with the multiple undo function ON, "multiple undo" is possible. See "Multiple undo function" in the Reference manual. <Note> After recording Recorded area You can repeatedly use the Undo/Redo functions until you perform one of the following operations: Redo Undo Before recording · You make a new recording. · You perform a new edit (Copy/Paste, Move/Paste, Auto Punch in/out, Erase, etc. ). · You turn off the power to the recorder. [. . . ] You can set the playback speed in the range of +6. 0% to -6. 0% in 0. 1% increments. The [VARI PITCH] key turns Vari Pitch mode on and off. When the function is turned on, the VARI PITCH LED lights up. When the function is turned off, the LED turns off. Initialize the recorder. Vari-pitch function procedures 3 2, 3, 5, 6 AUTO RTN CLIPBOARD AUTO RTN AUTO PUNCH AUTO PLAY IN OUT START IN OUT END PGM SEL EXIT/NO EXECUTE/YES 24TRACK DIGITAL RECORDER PREVIEW EJECT CHASE EDIT SETUP UNDO/REDO CHARACTER NEXT PREV LOCATE MEMORY DISP SEL STORE RECALL POWER 24bit 96kHz SHIFT TC READY TC GEN M. UNDO PREV TC NEXT TC TIME BASE SEL HOLD AUTO PUNCH REHEARSAL TAKE LOCATE VARI PITCH OPTICAL P. EDIT RECORD TRACK RECORD 6/14/22 7/15/23 8/16/24 TRACK SHIFT STOP PLAY REW F FWD 1/9/17 FOOT SW 2/10/18 3/11/19 4/12/20 5/13/21 4 ENVELOPE ALL INPUT ALL READY ACCESS 9-16 17-24 TRACK SHIFT CLIPBOARD PLAY LOCATE ABS 0 LOCATE REC END 1 1. [. . . ]