User manual FOSTEX AP2130

[. . . ] ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU' AU FOND. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. "WARNING" "TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. " SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. Retain Instructions - The safety and operating instructions should be retained for future reference. [. . . ] This blends well with any genre of music. All-purpose reverb (karaoke style) that makes any vocal sound professional. Short delay. HALL STADIUM ROOM The signal to be monitored can be selected using the [MONITOR SELECT] switch. Each press of the switch changes the monitor signals and the indicator for the current monitor signal (ST, 1-2, 3-4 or EFF RTN) is lit. Level meters PLATE 1 PLATE 2 Indicators [MONITOR SELECT] switch VOCAL1 ST 1-2 3-4 EFF RTN You can monitor the stereo L and R buss signal, which is output from the [STEREO OUT (L, R)] jacks. You can monitor the group 1 and 2 buss signals, which are output from the [GROUP (1, 2)] jacks. You can monitor the group 3 and 4 buss signals, which are output from the [GROUP (3, 4)] jacks. You can monitor the output signal (wet signal) of the internal effects processor. VOCAL 2 VOCAL 3 Mono DLY Pan DLY Short DLY The output level of the [PHONES] jack is controlled by the [MONITOR] and [PHONES] controls, while the output level of the [MONITOR L/R] jacks is controlled by the [MONITOR] control. The output levels of the monitoring signals are shown on the level meters above the [MONITOR SELECT] switch. <Note>: If any of the [SOLO] switches is set to ON, the solo signal is monitored, while the signal selected by the [MONITOR SELECT] switch is interrupted. 39 Model AP2130 [Mixer functions] · Solo monitor By setting the [SOLO] switch(es) to ON ( ), you can solo monitor the corresponding channel signal(s). If at least one of the [SOLO] switches is set to ON, the [SOLO] indicator slowly flashes. Channel grouping You can group channels to group busses for effective mixing. Using the channel grouping function, you can adjust levels of grouped channels using a single fader while maintaining the balance between channels. By setting the group assign switch (1-2 or 34) of a channel to ON, the channel signal is sent to group busses 1 and 2 or 3 and 4. A group buss signal is output from the [GROUP OUT] jacks. without afMPLAY441 fecting the other projects. The AP2130 automatically gives a project name to each project. The name of the first created project is "PROJ001" and the number (given by the last three MPLAY480 digits) is automatically counted up each time a new project is created. You can change a project name automatically given to a desired one later. (See page 66 for details. ) <Memo>: The "MPLAY441" and "MPLAY480" folders shown right above are empty when they are created. Only one "MPLAY441" folder and only one "MPLAY480" folder exist in the AP2130 hard disk even if you create more than one project. These folders are used to store stereo files transfered from a computer to the AP2130. As the folder names imply, the "MPLAY441" folder stores 44. 1 kHz files, while the "MPLAY480" folder stores 48 kHz files. When you start recording for the first time, 16 mono WAV files for tracks 1 through 16, as well as the "2mix" and "LOG" folders, are automatically created in the "PROJ001" folder. PROJ001 trk01 trk02 trk03 trk16 2mix LOG In the "2mix" folder, stereo mix files (stereo WAV files) created by stereo mix recording of the AP2130 are stored. In the "LOG" folder, the ADL files of the project is stored. You can play back mono files for tracks 1 through 16. A stereo mix file can be played back using the memory play function. [. . . ] Labor costs are also covered by Fostex America for one (1) year from the date of original purchase. Except as specified below, this warranty covers all defects in material and workmanship in this product. The following are not covered by this warranty: 1. Damage to any product that has been altered. [. . . ]