User manual FOSTEX DMT8 V 2.0

[. . . ] You Will find the DMT-8 Owner's Manual and this supplemental manual, which explains the extended functions of Version 2. Before using the DMT-8, please read both manuals thoroughly to understand the correct operation of the unit. Refer to the main Owner's Manual for functions other than those referred to in this supplement. The following function have been changed or added in DMT-8 Version 2. [. . . ] The letter "cH s t" on the display will blink, and you can now edit the value. Use the JOG dial to select from "1-2", "3-4", "5-6", "7-8", and "s t". Press the STOP button or the EXIT/NO key to quit Setup mode. If the external digital device has only coaxial connectors for digital input, use an optical COP-1 (optical/coaxial converter). Pressing the STORE key while holding down the HOLD/> key allows you to select an output Program. If you select tracks "1-2", "3-4", "5-6", "7-8", the add number track will be assigned to digital output R channel. When recording is completed, press the STOP button on both the DMT8 and the digital device. "rESoLu" in Setup menu allows you to turn Display Resolution mode on and off. When you are storing the In/Out points in real-time while using the "BAR/BEAT/CLK" Time Base, you can store them in steps of beats if the "rESoLu" (Display Resolution mode On/Off ) in Setup mode is "ON". When this resolution mode is "ON", the CLK value will be rounded up or off to "00" (at the beginning of the beat) as soon as you press the STORE key. This function is useful when you wish to use the Copy & Paste or Move & Paste function in setup of beats. This setting will be shared by all Programs and maintained after you turn off the power. * For example, if you to store value "001 BAR", "1 BEAT", "46 CLK" as the copy start point, and "002 BAR", "4 BEAT", "51 CLK" as the end point while using the BAR/BEAT/CLK Time Base, these value will be stored as follws when they are held if Display Resolution mode has been set to on: The following example uses a signature of 4/4. The display will change to something similar to this, and the current value will appear. Letters "oFF" on the display will blink, and you can now edit the value. Turning the JOG dial counter-clockwise will select "oFF", and turning it clockwise will select "on". Press the STOP button or the EXIT/NO key to quit Setup mode. The "SLAvE" option in the Setup menu allows you to turn Slave mode on and off. When this mode is on, the DMT-8 will be able to synchronize the MTC (MIDI time code) sent from the master DMT-8 (or D-80). (Along with the MTC, the master DMT-8 (or D-80) will send digital signals to the slave DMT-8 as a reference). This setting is effective only in the selected Program and will be maintained after you turn off the power. The display will change to something similar to this, and the current value will appear. [. . . ] When this command is received, D-80/DMT-8 ver2. 0 will reply with "33 44 (<on/off>). " 23 45: level status request The command inquiring the present output level data of the 1~8 tracks. 0, as the level data is updated about every 40msec. [. . . ]