User manual FOSTEX DV824

[. . . ] DVD MULTITRACK RECORDER Owner's Manual DVD Multitrack Recorder DV824 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU' AU FOND. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. "WARNING" "TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. " SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. [. . . ] · Name: A desired name · Type: Folder · Server name: 192. ### (### must be the same value as the DV824 IP address. ) · User name/Password: No need to be set. · Directory: / (slash) 74 DVD Multitrack Recorder DV824 4) Open the connection with the setting above, and transfer a file. <If you use WS-FTP> Before transferring a file, select "Binary" or "Auto" from among "ASCII", "Binary" and "Auto" shown in the center of the window. <If you use Fetch> Before transferring a file, set "Mode" to "Auto" and "Format" to "RawData". Connecting DV824 to LAN To connect the DV824 to a LAN, use a straight cable to connect the DV824 to a hub. For details about FTP application setting, see "Connecting DV824 directly to PC" described above. <Note>: If the IP address or sub net mask is not appropriately set when connecting the DV824 to a LAN, it may give bad influence to the LAN. Consult a network administrator if you need help for setting these items appropriately. FTP command details The following shows usable and unusable FTP commands when you can use the DV824 as the FTP server. <Note>: Only a single user can log in. More than one user cannot log in at the same time. · The following FTP commands can be used when DV824 works as a FTP server. USER PASS QUIT Identifying user name. TCP connection for Control is also cut off. When transferring data, relay the connection state open port number for data transferring at client side to server. Format: PORT IP1, IP2, IP3, IP4, P1, P2 (IPx: IP address, Px: port number represented by decimal number in every 1 byte unit) Designating data type (ASCII, BECIDIC, BINARY, LOCAL). · The following FTP commands cannot be used when DV824 works as a FTP server. APPE DELE Instructing server to write data transferred through data connection into an existing file additionally. Deleting designated file. RNFR Designating current file name for renaming. RNTO ACCT Changing current file name for renaming. Identifying user account. PORT HELP Displaying command description. Opening command state designated port exPASV cept default data port (No, 20) on server. STRU MODE RMD MKD STAT Designating file structure. Designating file transfer mode (Stream, Block, Compressed). Requesting server condition. TYPE Instructing server to transfer file though data RETR connection. STOR LIST Instructing server to write data transferred through data connection into a new file. Requesting server to send a list of files. NLST Requesting server to send a detailed list of files. CWD CDUP PWD NOOP SYST Changing current directory to upper level. Acquire server OS type. 75 DVD Multitrack Recorder DV824 TCP/IP SETUP menu setting To connect the DV824 [ETHERNET] port to a PC. make settings of the "TCP/IP SETUP" menu in the MENU mode appropriately. [. . . ] After "Completed!" is shown, the display returns to show the MENU list screen. To exit the MENU mode, press the [STOP/HOME] key. 156 DVD Multitrack Recorder DV824 Chapter-9: Specifications 157 DVD Multitrack Recorder DV824 Inputs/Outputs *0 dBu=0. 775 Vrms, 0 dBV=1 Vrms. Reference level : -12 dBFS/-18 dBFS/-20 dBFS (default: -20 dBFS, selectable in the "Ref. level" menu of the SYS SETUP menu) ANALOG INPUT (CH1 through CH8) · Connectors · Input impedance · Reference input level · Maximum input level : : : : XLR-3-31 type (balanced, pin 2: hot) More than 10k +4dBu +24 dBu ANALOG OUTPUT (TR 1 through TR 8) · Connectors · Output load impedance · Reference output level · Maximum output level PHONES · Connector · Applicable load impedance · Maximum output level DIGITAL I/O (for channels 1 through 8) · Connector · Format <Input> <Output> : : : : : : : : : : XLR-3-32 type (balanced, pin 2: hot) More than 10k +4 dBu +24 dBu 6mm dia stereo phone jack More than 8 100 mW (at 32 ) D-sub 25-pin IEC 60958 (S/P DIF) or IEC 60958 (AES/EBU), auto selection IEC 60958 (S/P DIF) or IEC 60958 (AES/EBU), The format of an output signal is selected in the "Digital out" menu of the SYS SETUP menu. WORD INPUT · Connector : BNC type · Reference input level : TTL level (with 75 termination switch) * The signal type (word or video) is automatically detected. [. . . ]