User manual FOSTEX PH-100

[. . . ] Read Instructions - All the safety and operating instructions should be read before the appliance is operated. Retain Instructions - The safety and operating instructions should be retained for future reference. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. Follow Instructions - All operating and use instructions should be followed. [. . . ] [INPUT (ST, MONO)] select switch Selects whether monitoring a signal from the [INPUT] jacks (balanced or unbalanced) in stereo or mono. 2. [PEAK] indicator Represents overload of the input signal. If the indicator frequently lights up, turn down the [INPUT] and / or [AUX IN] level controls so that the indicator does not light up. ST MONO The input signal is fed to the [PHONES] and [CASCADE OUT] jacks in stereo. The input signal is fed to the [PHONES] and [CASCADE OUT] jacks in mono (L+R). 3. [AUX IN] level control Adjusts the input level of a stereo signal from the [AUX IN] jacks on the rear panel. The signal adjusted by this control is mixed with the stereo signal from the [INPUT] jacks which is level-controlled by the [INPUT] level control, and fed to both the [PHONES] and [CASCADE OUT] jacks. 7. [PHONES] jacks (1 through 10) Connect headphones. There are also headphone jacks on the rear panel so you can use whichever you like. <Note> Each headphone jack on the front panel take priority to the corresponding (same number's) headphone jack on the rear panel. You cannot use both front and rear jacks with the same number simultaneously. If you connect headphones to both front and rear jacks with the same number, you can only use the headphones connected to the front jack. 4. [POWER] switch/indicator The switch turns on or off the power. The indicator lights up when the power is on. When turn on or off the power, set the level controls of the PH-100 and connected device(s) to the minimum positions. 5. [INPUT] level control Controls the input level of the [INPUT] jacks (balanced or unbalanced) on the rear panel. AUX IN 5 <Note> 10 PEAK INPUT 0 5 CAL ST MONO 0 10 At the CAL position, you can get the nominal input level (+4 dBu or -10 dBV). CAL position shows the nominal position. " 3 Model PH-100 Rear Panel section 1 5 4 2 3 2 1 3 L 5 4 4 3 2 1 56 L/MONO L/MONO +4dBu 7 +4dBu HOT COLD GND XLR 2 3 1 PHONE T R S 10 9 8 7 6 R 10 9 8 7 -10dBV -10dBV 6 R R AC IN PHONES (PRIORITY TO "FRONT PHONES" OUTPUT) CASCADE OUT (-10dBV) CHANNEL IN (-10dBV) AUX IN (-10dBV) INPUT (-10dBV) INPUT L INPUT R 8 1. [AC IN] connector Connects the supplied power cord. You can control the signal level using the [INPUT] control on the front panel. To cascade two PH-100s, connect between the [CASCADE OUT] jacks of the first unit and the unbalanced [INPUT] jacks of the second unit. See page 6 for details about cascade connection. 2. [PHONES] jacks (1 through 10) Connect headphones. There are also headphone jacks on the front panel so you can use whichever you like. <Note> Each headphone jack on the front panel take priority to the corresponding (same number's) headphone jack on the rear panel. You cannot use both front and rear jacks with the same number simultaneously. [. . . ] Box 145 Vinderen, 0319 Oslo 3, Norway TEL: (+47) 22-139900, FAX: (+47) 22-148259 <FINLAND> NAME: Noretron Oy Audio ADD: P. Box 22, FIN-02631 Espoo, Finland TEL: (+358) 9-5259330, FAX: (+358) 9-52593352 <PORTUGAL> NAME: Caius - Tecnologias Audio e Musica, Lda. ADD: Rua de Santa Catarina, 131 4000 Porto, Portugal TEL: (+351) 2-2086009/2001394, FAX: (+351) 2-2054760/2087488 <FRANCE> NAME: Guillard Musiques ADD: ZAC de Folliouses, B. 609, Les Echets, 01706 Miribel, France TEL: (+33) 472 26 27 00, FAX: (+33) 472 26 27 01 <SPAIN> NAME: Multitracker, S. [. . . ]