User manual FOXCONN 865G

[. . . ] Statement: This manual is the intellectual property of Foxconn, Inc. Although the information in this manual may be changed or modified at any time, Foxconn does not obligate itself to inform the user of these changes. Trademark: All trademarks are the property of their respective owners. Version: User's Manual V1. 0 in English for 865G/GV/PE7MF motherboard. Symbol description: Note: refers to important information that can help you to use motherboard better. Attention: indicates that it may damage hardware or cause data loss, and tells you how to avoid such problems. Warning: means that a potential risk of property damage or physical injury exists. More information: If you want more information about our products, please visit Foxconn's website: http://www. foxconnchannel. com This product and its accessories are produced after 13th Aug. , 2005 and comply with the WEEE2002/96EC directive. Declaration of conformity HON HAI PRECISION INDUSTRY COMPANY LTD 66 , CHUNG SHAN RD. , TU-CHENG INDUSTRIAL DISTRICT, TAIPEI HSIEN, TAIWAN, R. O. C. [. . . ] After pressing <Enter>, you can select the HDD using the <PageUp>/<PageDn> or Up/Down arrow keys, and change the HDD priority using <+> or <->; you can exit this menu by pressing <Esc>. vVirus Warning Allows you to choose the VIRUS warning feature for IDE hard disk boot sector protection. If this function is enabled and someone attempts to write data into this area, BIOS will show a warning message on screen and an alarm will beep. The setting values are: Disabled and Enabled. Note: Such function provides protection to the start-up sector only; it does not protect the entire hard disk. vCPU L1 & L2 Cache This option is used to enable or disable the CPU L1 and L2 cache. vCPU L3 Cache This option is used to enable or disable CPU L3 cache. vHyper-Threading Technology This option is used to turn on or off the Hyper-Threading function of the CPU. Note: This function will not be displayed until a CPU that supports HyperThreading has been installed. 28 Chapter 3 BIOS Description vFirst/Second/Third Boot Device This option allows you to set the boot device sequence. vBoot Other Device W ith this function set to Enabled, the system will boot from some other devices if the first/second/third boot devices failed. vBoot Up Floppy Seek If this option is enabled, BIOS will activate the floppy drive during the system boot and the drive's indicator will flash after the activation. The magnetic head will move back and forth from A to B. vBoot Up NumLock Status This option defines if the keyboard Num Lock key is active when your ystem is started. vTypematic Rate Setting If this option is enabled, you can use the following two items to see the typematic rate and the typematic delay settings for your keyboard. vTypematic Rate (Chars/Sec) Use this option to define how many characters per second a held-down key generated. vTypematic Delay (Msec) Use this option to define how many milliseconds must elapse before a held-down key begins generating repeat characters. vSecurity Option When it is set to "Setup", a password is required to enter the CMOS Setup screen; W hen it is set to "System", a password is required not only to enter CMOS Setup, but also to start up your PC. vMPS Version Control For OS This option is used to set up the version of MPS Table used in NT4. 0 OS. 29 Chapter 3 BIOS Description vOS Select For DRAM > 64MB This option is only required if you have installed more than 64 MB of memory and you are running the OS/2 operating system. Otherwise, leave this option at the default. vReport No FDD For WIN OS If you are using the Windows OS and running a system with on floppy drive, select "Yes" for this option to ensure compatibility with W indows OS logo certification. vDelay For HDD (Secs) Some HDD require some spin-up time in order to be identified correctly. This settings specifies how long the BIOS has to wait. vFull Screen LOGO Show This item allows you to enable or disable full screen logo. vSmall Logo (EPA) Show This option allows you to enable or disable the EPA logo. 30 Chapter 3 BIOS Description CPU Feature Menu vDelay Prior to Thermal This option is used to set the delay time before the CPU enters auto thermal mode. [. . . ] Only this page is set to Manual Adjustment, the Freq. , Vlotage, and Fan pages can be adjusted by manual. 51 Chapter 5 Directions for Bundled Software Go to CPU page Close this page Ajust by manual Reset the changes Select the different benchmarks Apply the changes Note:The FOX ONE developed benchmarks to determine the current perfor mance level of the system is not supported on this motherboard. So you can't adjust by this manual. 3. Page - Frequency Control This page lets you set memory and PCI Express frequency by manual. Go to Freq. page Close this page Select the option you want to set Adjust by manual Reset the changes Apply the changes 52 Chapter 5 Directions for Bundled Software 4. 1 Limit Setting - CPU Temp. This page lets you to set CPU high limit temperature and enable the alert function. Go to Adjust page Show current CPU temperature value Enable alert function when the CPU temperature is higher than high limit value Show current high limit value of CPU temperature Set high limit by dragging the lever 4. 2 Limit Setting - Sys Temp. This page lets you to set system high limit temperature and enable the alert function. Show current system temperature value Enable alert function when the system temperature is higher than high limit value Show current high limit value of system temperature Set high limit by dragging the lever 53 Chapter 5 Directions for Bundled Software 4. 3 Limit Setting - CPU Fan This page lets you to set CPU fan low limit rpm and enable the alert function. Show current CPU fan rpm value Enable alert function when the CPU fan rev is lower than low limit rpm value Show current low limit rpm value of CPU fan Set low limit rpm by dragging the lever 4. 4 Limit Setting - Sys Fan This page lets you to set system low limit rpm and enable the alert function. Show current system fan rpm value Enable alert function when the system fan is lower than low limit rpm value Show current low limit rpm value of system fan Set low limit rpm by dragging the lever 54 Chapter 5 Directions for Bundled Software 4. 5 Limit Setting - Chassis Fan This page lets you to set chassis fan low limit rpm and enable the alert function. Show current Chassis fan rpm value Enable alert function when the chassis fan is lower than low limit rpm value Show current low limit rpm value of chassis fan Set low limit rpm by dragging the lever 5. Voltage Page - Voltage Control This page lets you set CPU voltage, memory voltage and North Bridge voltage by manual. Go to Voltage page Select the option you want to set Adjust by manual Reset the changes Apply the changes Note:The voltage control is not supported on this motherboard. So you can't adjust by this manual. [. . . ]