User manual FREECOM CABLE II USB

[. . . ] Page 12 © 2001 FREECOM Technologies 3 FREECOM Cable II USB / Cable II IEEE 1394 Dear User, GB welcome to the installation of your FREECOM Cable II. Before installing the drive, please read through the following points regarding its compatibility with your system. GB FREECOM Technologies GmbH Berlin, Germany www. freecom. com Warning !The products named in this manual are only used for identification purposes and may be trademarks or registered trademarks of the respective companies. This device was designed for home or office use. [. . . ] The Hardware Installation Wizard displays the found drivers. The files from the FREECOM installation disk will be installed on your hard disk. The next "Hardware Assistant" window shows you that the software for the new device has been installed. 7 FREECOM Cable II USB / Cable II IEEE 1394 8. Click on "Finish" in the next window. GB 2 9. To install further drivers for the "FREECOM USB Cable II", you will have to repeat the installation procedure. Follow the instructions of the "Hardware Wizard". Driver installation is then complete and your drive will appear with the new drive letter under "My Computer". For CD-R(W) drives, now install the mastering and UDF software if necessary. Note: you can plug the drive in and unplug it at the USB port while the PC is running. The drive will be recognized automatically under "My Computer" when it is reconnected ("hot plug & play"). 2. 2 Uninstalling the software under Windows 98 SE / Windows ME (USB) The FREECOM installation disk contains the program DriverRemove. EXE with which you can remove all FREECOM drivers for USB. 8 Driver installation for PC 2. 3 Allocation of the drive letter to the FREECOM drive under Windows 98 SE / Windows ME (USB) After successful installation, Windows assigns the FREECOM drive a new drive letter automatically in most cases. This can shift the drive letter of an already present drive (for example, from 'D' to 'E'). If this leads to problems, it is possible to change the drive letter assignment as follows. Click "Start" - "Settings" - "Control Panel". Select "Device Manager" and click on "Drives" or "CD-ROM", if the FREECOM drive you are using is a CD-ROM, DVD-ROM, CD recorder or CD rewriteable. Click the FREECOM drive, and then "Properties" - "Settings". (The currently assigned drive letter as well as the reserved drive letters will then be displayed). Under Reserved Drive Letter, enter a drive letter, for example, 'F' for the FREECOM device as the "Start drive letter" and "F" again as the "Last drive letter". When you restart your computer, the FREECOM drive will be assigned the letter "F" in "My Computer". 2. 4 Installation under Windows 2000 (USB) 1. After the FREECOM Cable II USB is connected to the PC, the driver data base is loaded automatically. Note: If you are connecting a USB device to your computer for the first time, you might be prompted to first install the special Windows 2000 drivers for USB from the Windows 2000 CD. [. . . ] Insert the "Toast Installer CD" in your CD-ROM drive. The "Toast Installer CD" includes installers in several languages, each in its own installer. Double-click the "Toast" Installer (the appropriate language). Follow the on-screen instructions to install "Toast" on your hard disk. [. . . ]