User manual FREESTYLE SHARK BUZZ

[. . . ] Seconds will be set and flashing. CARE AND MAINTENANCE 1. Back case cover should only be removed by an authorized watch repair specialist. Always rinse your watch in fresh water after immersion in salt or chlorinated water. [. . . ] The warranty excludes normal wear and tear and abuse. Special note: Freestyle® watches are designed and engineered to be highly water-resistant, and to withstand the most active of lifestyles. The most important component in keeping your watch water-resistant is the case back Oring, which prevents water from entering the watch through the case back. Water leakage most often occurs after improper battery replacement. We strongly recommend having a certified jeweler, watch repair technician or Freestyle's service center replace your battery. Water leakage due to improper battery replacement is not covered under warranty. To measure elapsed time, press the ST/STP button to start the counter. Press the ST/STP button to stop the counter. Should your Freestyle® watch require warranty service, send it along with the following: 1. Please include $8. 50 for processing and handling, using one of the following payment methods: -Check -Money order -Credit card (be sure to include card number and expiration date) REMEMBER: NEVER INCLUDE A SPECIAL WATCHBAND OR ANY OTHER PERSONAL ARTICLES OF VALUE IN YOUR SHIPMENT. To reset the chronograph, press the RESET button when the counter is stopped. HOW TO OPERATE THE NIGHT VISIONTM ELECTROLUMINESCENT BACKLIGHT Press the EL/SET button to activate the Night VisionTM electroluminescent backlight. The light will remain illuminated for approximately four seconds. Send to the following address: Freestyle Attn: Individual Returns 47-50 33rd Street Long Island City, NY 11101 (718)-729-8890 Please allow 30 days for return of your watch. Neither this warranty, nor any other warranty expressed, is assumed for any incidental or consequential damages, including but not limited to the mathematical accuracy of the MODE RESET HOW TO SET TIME, DATE AND 24-HOUR FORMAT From TIME mode: press and hold the EL/SET button for approximately two seconds; the seconds digits will flash. Pressing the ST/SP button resets the seconds to zero. Press MODE button to change to the next item. The setting sequence will be a cycle by seconds, hours, month, date and day of week. [. . . ] Some states do not allow limitations on how long an implied warranty lasts, or the exclusions of or limitations on consequential damages, so the above limitations may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. This warranty applies to watches purchased in the United States. [. . . ]