User manual FREESTYLE SHARK CLASSIC MID

[. . . ] If 24-hour display format is selected, there will be no PM symbol will be display. - After all adjustments are complete, press S4 to exit setting mode and weekday will be adjusted automatically. If there is no button operation for 2-3 minutes in setting mode, the display will automatically return back to Time mode or other mode respectively. HOW TO USE DATE MODE - Press S3 to display DATE, "DT" label marks are displayed at the left row. [. . . ] Press any button to stop the alarm sound. If the chime function is "on", the product will be button confirmation sound. If 24-hour display format is selected for time mode, there is no PM symbol "PM" for alarm time. If there is no button operation for 2-3 minutes in setting mode, the display will return back to Alarm mode automatically. HOW TO USE CHRONOGRAPH Reset Run Split HOW TO USE TIMER R 1 sec auto R R press S1 to start S1 R R Stop Start S1 BASIC OPERATION OF BUTTONS S1: - Forward selection of data number - start/stop chronograph - toggle alarm on or off S2: - Split/ reset chronograph - Select alarm 1 or alarm 2 S3: - Mode change - Select setting (set or calibration) S4: - Back light - Enter setting mode (press and hold) - Exit (setting mode) MODE CHANGE OPERATION The mode change sequence is shown as follows: TIME S3 DATE S3 ALARM CHRONOGRAPH TIMER S3 S3 S3 15 sec - Press S1 to start the Timer. Then press S2 to go back preset the Timer. The Timer now shows the Timer is ready for running again. - Press and hold S4 for 3 seconds to enter setting mode, the second digits start flashing. - Press S1 (forward) to adjust the flashing digits. - Press S3 to select the next digits or Counter Repeat, Counter Stop for setting. The setting sequence is shown as follows: S3 SECOND S3 MINUTE S3 HOUR S3 Counter Repeat S1 Counter Repeat S3 Auto count-down R R S1 R R S1 auto Hold S2 for 2 seconds until the user to stop. R R aut R R Chime icon Alarm icon - Press S1 to start the chronograph. - For the first hour, minutes, seconds and 1/100 second are displayed. Then hours, minutes and seconds are displayed. - Press S2 to split time, it will show "SPL" for 15 second. Then the display will show current running times of chronograph. - Press S1 again to stop the chronograph. Then press S2 to go back preset the chronograph. The chronograph now shows all zeros and is ready for running again. The chronograph is of 1/100second resolution for first hour and 1-second resolution for the reset and with working range up to 24 hours, then the chronograph stops automatically. - After all adjustments are complete, press S4 to exit setting mode. HOW TO RESET THE DISPLAY Press and hold S1, S2, S3 buttons simultaneously, all segments will be "on", then release the buttons and the display will be reset. [. . . ] Water leakage due to improper battery replacement is not covered under warranty. Should your Freestyle ® watch require warranty service, send it along with the following: 1. Please include $8. 50 for processing and handling, using one of the following payment methods: -Check -Money order -Credit card (be sure to include card number and expiration date) REMEMBER: NEVER INCLUDE A SPECIAL WATCHBAND OR ANY OTHER PERSONAL ARTICLES OF VALUE IN YOUR SHIPMENT. Please allow 30 days for return of your watch. Neither this warranty, nor any other warranty expressed, is assumed for any incidental or consequential damages, including but not limited to the mathematical accuracy of the product. [. . . ]