User manual FRIEDLAND D917S LIBRA+

[. . . ] Keep these notes in a safe place for future reference. checking pack contents Unpack your chime kit and identify the following parts: ¬ Chime Chime bracket 2 x fixing screws for chime 2 x wall plugs Before proceeding with the installation, please note the following safety warnings: Always follow the manufacturer's advice when using power tools and wear suitable protective equipment (e. Safety goggles) when drilling holes etc. Before drilling holes in walls, check for ¬ hidden electricity cables and water pipes, the use of a cable/pipe locater maybe advisable if in doubt. [. . . ] When the Icon you want is lit, release the button. ¬ While the Icon you have selected is lit, operate your push. Unlearn procedure If you want to remove a push from the chime's memory: ¬ Press the button and keep it pressed. When the Icon associated with the push to be un-learnt is lit, release the button. ¬ Press and hold down both & buttons, until a `beep' sound is heard. The `Main door' and `Backdoor' icons are usually used for bell pushes. The other icons are intended for use with other compatible devices, such as PIR movement detectors and Telephone ring detector. They can be changed, if required, by opening the sliding window of the chime and gently peeling off the strips. If desired, the strips can be cut into individual icons and fixed to the chime in a different order. Use the Programming procedure to change the icon associated with a push. The Chime can be free standing or wall mounted using the wall bracket provided. If wall mounting is preferred, screw the bracket to the wall (see Fig 5). The Chime hooks onto the wall bracket as illustrated. To hear the chime sounds without operating the bell push, press the button. A `beep' sound is heard in learn mode. ¬ The push you are programming has already been learnt by the chime. ¬ If you want to change the icon associated with the push, use the un-learn procedure, then programme the push again. Two `beep' sounds are heard after the normal chime sound. This indicates a low battery in the bell push that activated the chime. When the bell push is operated, the amber confidence light does not turn on, or is only on for a short time. [. . . ] Libra + is not compatible with the earlier Libra system. Friedland guarantees this product for 2 years from the date of purchase. Proof of purchase is required; this does not affect your statutory rights. If you require further information about our product, call the Friedland helpline on 01268 563066. [. . . ]