User manual FRIGIDAIRE DRYER

[. . . ] To change the dryness level, press DRYNESS until the desired selection is made. If a dryness level or option is not available for a cycle, it will not light. The changes you make will be remembered the next time that cycle is selected. [. . . ] Timed Dry To manually select the drying time for any load, turn the knob to a numbered setting. Drying times from 15 to 90 minutes are available in 15-minute increments. You will not be able to select a cycle or dryness level. For best results, follow the fabric care label instructions on items to be dried. high is recommended for sturdy fabrics. Cycle Selection Medium is recommended for wrinkle free, permanent press and For best results, follow the fabric care label instructions on items lightweight fabrics. Auto Dry Auto Dry cycles take the guesswork out of drying time. The load No Heat should only be used with a Timed Dry setting to dry will automatically be dried at the selected temperature to the items containing feathers, down, foam rubber, plastics or rubdesired dryness level. The dryer senses the moisture level of the ber-like materials; to freshen clothing, pillows or blankets; or to load as it tumbles through heated air. auto Dry cycles save time dust draperies. Note: Using No Heat in any Auto Dry cycle will result in long drying times and /or wet loads at the end of the cycle. To avoid fire hazard, do not use heat to dry items containing feathers or down, foam rubber, plastics, or similarly textured, rubber-like materials. A suitable combination of dryness level and options will automatically be displayed for each cycle. The settings can be changed before the cycle is started. Those adjustments will automatically be remembered each time that cycle is selected. If a dryness level or option is not recommened for a cycle, the indicator will not light. see the "Dryer Settings Chart" for more details. If changes are attempted after the cycle starts, the status lights will blink and the signal will beep 3 times. [. . . ] When the Cycle Signal is selected, a beep will be heard periodically. The load may be removed any time during Press Saver. (Control Lock) To avoid having someone accidentally start or stop the dryer, press OPTIONS and Select at the same time and hold for about 10 seconds until the (Control Lock) lights up. [. . . ]