User manual FRIGIDAIRE FASE7074LR INSTALLATION

[. . . ] For your safety the information in this manual must be followed to minimize the risk of fire or explosion or to prevent property damage, personal injury or loss of life. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Read all of the following instructions before installing and using this appliance: Destroy the carton and plastic bags after the dryer is unpacked. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers causing suffocation. [. . . ] 2 No other fuel burning appliance shall be installed in the same closet as the gas dryer. 3 Your dryer needs the space around it for proper ventilation. DO NOT install your dryer in a closet with a solid door. 4 Closet door ventilation required: A minimum of 120 square inches (774. 2 cm²) of opening, equally divided at the top and bottom of the door, is required. Openings are required to be unobstructed when a door is installed. * Dryer must be vented straight back to achieve 0" (0 cm) rear installation. 3" (77cm)* to front of closed door 27. Freestand dryer on floor floor line Floor line * To obtain these minimal depth dimensions, dryer must be vented straight back. Using a quick-turn 90° elbow (right or down on freestanding dryer) adds approximately 0. 3" (77cm)* to front of closed door * To obtain these minimal depth dimensions, dryer must be vented straight back. If in doubt, call a licensed electrician. 3 DO NOT modify the plug you've installed on this appliance. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. For a permanently connected dryer: 1 The dryer MUST be connected to a grounded metal, permanent wiring system; or an equipment grounding conductor must be run with the circuit conductors and connected to the equipmentgrounding terminal or lead on the appliance. ELECTRICAL SHOCK HAZARD Improper connection of the equipment grounding conductor can result in a risk of electrical shock. Check with a licensed electrician if you are in doubt as to whether the appliance is properly grounded. for a grounded , cord-connected dryer: 1 The dryer MUST be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electrical shock by a path of least resistance for electrical current. 2 Since your dryer is equipped with a power supply cord having an equipment-grounding conductor and a grounding plug, the plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. If in doubt, call a licensed electrician. 3 DO NOT modify the plug provided with this appliance. [. . . ] Reinstall plastic plug in the square hole next to the hinge. Take care not to strip out the plastic holes. Take care not to strip out the plastic holes. 5 Locate new metal strike supplied with dryer manuals. [. . . ]