User manual FRIGIDAIRE FEB30T7DCB Owners Guide

[. . . ] ELECTRONIC OVEN CONTROL Control Pad Functions Read the instructions carefully before using the oven. For satisfactory use of your oven, become familiar with the various functions of the oven as described below. Note: The graphics on your timer may not look exactly like the one shown. This doesn't change the way it operates. [. . . ] Press the UP or DOWN ARROW pad until the desired baking time appears in the display. The oven will turn ON and begin heating. Note: When the control is set for this function the oven temperature will be displayed. To see the cook time remaining press the BAKE TIME pad and to see the time of day press the CLOCK pad. To Program Oven for a Delayed Start Time and to Shut-Off Automatically (Delayed Start Bake): 1. Be sure that the clock shows the correct time of day. "-- -- --°" appears in the display. Within 5 seconds, press the UP or DOWN ARROW pad. The display will show "350°F (177°C). " By holding the UP or DOWN ARROW pad, the temperature can then be adjusted in 5°F increments (or 2° if the control is set to display Celsius). Wait 5 seconds or press the START pad to accept the temperature. "0:00" will flash in the display (MIN:SEC) and (HR:MIN) if programmed for more than 60 minutes. Press the UP or DOWN ARROW pad until the desired baking time appears. Wait 5 seconds or press the BAKE pad for the control to accept the time. The earliest possible start time will appear in the display. Press the UP or DOWN ARROW pad until the desired start time appears in the display and wait 5 seconds to accept. Once the controls are set, the control calculates the time when baking will start and stop. The oven will turn ON at the delayed start time and begin heating. Note: When the control is set for a delayed time bake the time of day is displayed until the delayed time bake is reached. When the oven will turn on, the oven temperature will be displayed. To see the cook time remaining press the BAKE TIME pad and to see the time of day press the CLOCK pad. "END" will appear in the display window and the oven will shut off automatically. To Change the Oven Temperature or Bake Time after Baking has Started: 1. [. . . ] As soon as the controls are set, the motor driven lock will begin to close automatically and the "LOCK" indicator light will appear. DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the oven door to lock). "CLn" will appear in the display during the Self-Clean cycle and the "LOCK" light will glow until the Self-Cleaning cycle is complete or cancelled and the oven temperature has cooled. When the Self-Clean or Speed Clean Cycle is Completed: 1. [. . . ]