User manual FRIGIDAIRE FGX831FS1

[. . . ] The heat automatically turns off and the load continues to tumble for 5-10 minutes. This reduces wrinkling and makes items easier to handle during unloading. Drying time varies depending on size and dampness of load, weight and fabric type. [. . . ] Single items and small loads usually take longer to dry. Dry one load after another to take advantage of a warm dryer. ⷠOpening the door needlessly causes warm air to escape, which prolongs drying time. ⷠIf possible, use the dryer on low humidity days. Install the dryer in an area where the room temperature is at least 45°F (7°C). DO NOT pour fabric softener directly onto the wash load. The dry load should not be higher than top of agitator vanes. Select the wash cycle and settings according to type, size, and soil level of each load. Close lid and pull out cycle selector knob to start washer. The washer will fill with water but will not agitate or spin wiht the lid open. to stop the washer , push in the Cycle Selector knob. To change a cycle, push in the Cycle Selector knob and turn it clockwise to the desired setting. Wait about 2-3 minutes for safety lid lock to release. Push in and turn the Cycle Selector knob clockwise to the desired cycle. For the best results, follow the washing instructions on the fabric care labels The Whites, Colors and Delicates cycles progress through wash agitation, drain and spin with spray rinse, rinse agitation, and a final spin. To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS in your Laundry Center Owner's Guide before operating this appliance. [. . . ] To conserve energy, the hot wash water is regulated to approximately 100° F. Warm and cold wash and rinse water temperatures are not regulated. Load Size Turn the Load Size knob to select a water level appropriate for the load size. [. . . ]