User manual FUJIFILM DP EDITOR QUICK START

[. . . ] I I I I USB Mass Storage Driver Exif Viewer DP Editor Exif Launcher Quick Start Guide Thank you for purchasing these FUJIFILM products. This Quick Start Guide provides you with a simple summary of how connect your PC and camera via the USB ports and how to install the software provided in this package on your personal computer (PC). Read this guide carefully to ensure that you use the software correctly. For detailed information on how to use the Exif Viewer and DP Editor software, refer to the User's Guide on the enclosed CD-ROM. BB10768-301(1) E IMPORTANT Be sure to read this page before using the Software. 6. [. . . ] If a large amount of data is being copied, camera access continues for a short time after the message displayed on the PC has gone off. · Refer to the camera Owner's Manual for more information on the access display on the camera. · In Windows 2000 Professional, disconnecting the USB cable without performing the "Unplug or Eject hardware" procedure can cause the computer to hang. 4. Thumbnail images for the image data recorded on the SmartMedia are displayed in the thumbnail display area. If you double-click a thumbnail image, the image is displayed in an Image window. To close the image window, use the [Close] button in the top right corner of the window. You can also copy the image to your PC desktop by dragging the thumbnail from the thumbnail display area and dropping it onto the desktop. NOTE Do not perform the operations listed below when a camera file is open and the camera display indicates that data access is in progress. Performing any of these operations could corrupt the data on the media or damage the media itself. Switch the camera off/Touch any of the camera control buttons/ Disconnect the USB cable/Remove the media/Open the media cover/ Remove the camera batteries 18 19 Windows Updating the USB Driver on a Windows PC Update the USB Driver in the following situations: (1) When you want to upgrade the driver version (2) When you have installed the driver but the software does not run NOTE If you cannot find USB Mass Storage in the "USB Controller" list, look under "Other devices". Updating the USB Driver for Windows 98 and Windows Me 1. Switch on your PC and launch Windows 98 or Windows Me. Insert the CD-ROM provided into the CD-ROM drive. Open the "My Computer" window, double-click "UNIN_FUM. EXE" in the "\USBDRV\WIN98\UNINST" folder on the CD-ROM and remove the installed driver. NOTE Close all files when removing drivers. 8. Select the "Driver" tab and click the [Update driver. . . ] button. This launches the Upgrade Device Driver Wizard. Select "Display a list of the known drivers for this device so that I can choose a specific driver" as the search method and click the [Next >] button. NOTE When the dialog box opens, "Search for a suitable driver for my device (recommended)" is selected. Change this selection to "Display a list of the known drivers for this device so that I can choose a specific driver. 4. Updating the Windows 2000 Professional USB Driver 1. Switch on your PC and launch Windows 2000 Professional. Insert the CD-ROM provided into the CD-ROM drive. Load a media containing photographed images into the camera and switch the camera on. Use a USB cable to connect the camera to the USB port on the PC. Open the Control Panel, click "System" and open the System Properties dialog box. [. . . ] For Windows 2000 Professional, specify \USBDRV\WIN2KPRO\UW2K04CB. INF. When I connect the camera to my PC, the "Add New Hardware Wizard" appears. I Is the USB Driver installed?Solution: Install the USB Driver software as directed by the on-screen instructions. When I double-click the removable disk icon, "The device is not ready" error message appears. I Is the media loaded in the camera?Refer to the Owner's Manual supplied with the camera for details. A warning message appeared when I removed the media from the camera. Solution: This procedure may corrupt the data on the media or damage the media itself. [. . . ]